Tim –
If you haven’t seen these already, the Dante videos were invaluable to me… (bottom of page)
https://www.allen-heath.com/UK/Products/Pages/iLiveTrainingVideos.aspx?TOV=1&CatId=iLiveSeries&SID=36
Best,
-Tim Tyler
Tim Tyler
Detonator Sound
Richmond, Va USA
R72/32 laptop iPad Dir-815 Dante
Contact Tech Support:https://www.allen-heath.com/UK/Support/Pages/technicalsupport1.aspx they should be able to help you. The iLive range can be reset and I would think it is possible with GLD as well – best to ask the people who make em!
Cheers
Richard Howey
Audio Dynamite Ltd
IDR48/IDR16/T112/R72/Mixpad,Tweak,
Dual M-Dante/DVS, 17″MBP/Logic 9/Custom Mackie Control
yep put us down 
Jeremy Koch
Innovative Production Services – http://www.innovative.net.au
Current stock:
2x T112, 1x T80, 2x R72, 2x iDR-48, 3x iDR-16, 2x xDR-16
4x Dante Cards, 3x ACE Cards
Musikhof –
“Nearly all other vendors like Soundcraft, Yamaha and even Behringer … deployed their apps also on android platform.”
Not so. None of the above would be more accurate.
Tim Tyler
Detonator Sound
Richmond, Va USA
R72/32 laptop iPad Dir-815 Dante
A while ago I had my ilive r72 repaired due to some sort of screen-battery problem. basically the screen never started properly.
When I got it back the scenes hadnt been removed, the channel names and settings were ok BUT the strip layout were all out of order. so i fixed it but I cant get the strip setup to SAVE!
So every time I start the console now I have to configure the strip layout both in left and right bank. I have to make everything from LR to DCAs to FXs etc. “appear” in the strip section even if I save it.
I have looked into the scene saving settings but havent found a solution yet.
please HELP
thanks.
The only gates I use on vocals are the clever Optogates. See here https://www.optogate.com/index_opto_uk.html
They work great on small stages where there are a lot of open mic’s and high stage volume (rock bands etc) causing excessive bleed.
I have also used on 8 back stage chorus microphones for a theatre show where I set one mic as a master ( with an Optogate) and then side chain gated all other chorus channels to it using the iLive internal gates with a very low threshold. If no one stood to sing in the master microphone then none of the other mic’s would be on! Worked a treat and saved lots of scene programming.
Cheers
Richard Howey
Audio Dynamite Ltd
IDR48/IDR16/T112/R72/Mixpad,Tweak,
Dual M-Dante/DVS, 17″MBP/Logic 9/Custom Mackie Control
quote:
Originally posted by woutert…the only thing that you need to respect is that if you connected you PC to the iLive controller (R72,T80, T112 etc) network port, that this port is limited to only 10Mb/s
Hey, wouter — are the network ports on the iDR itself also limited to a 10Mb/s signaling rate?
I could plug in my notebook computer and check but my iDR is buried in the nose of my trailer.
Thanks
+1!
kr
joe
iDR32 & IPad1 & R72 & DANTE
*** less is more ***
I’ve got an R72, but never use SIP… If the button is not on the surface, perhaps there is a control available from the touchscreen? I’m just guessing…
Tim Tyler
Detonator Sound
Richmond, Va USA
R72/32 laptop iPad Dir-815 Dante
Joe –
What Eotsskleet said about the surface outputs. By the way, nice work on the visuals!
Tim Tyler
Detonator Sound
Richmond, Va USA
R72/32 laptop iPad Dir-815 Dante
quote:
Originally posted by Detonator
Joe –
DI (direct out) channels 1 & 2 to a couple of unused outputs.
Tim Tyler
Detonator Sound
Richmond, Va USA
R72/32 laptop iPad Dir-815 Dante
Hi Tim,
That makes good sense but we’re tapped out on our outputs of the AR2412. We’re using 2 for Mains LT & RT out, and we’re using the other 10 for 5 stereo in-ear mixes. I could add an AR84. Below is a picture if our rack for reference.
Thanks,
Joe
GLD-80 w/M-DANTE, GLD-AR2412, MacBook Pro, Studio One 2
Joe –
DI (direct out) channels 1 & 2 to a couple of unused outputs.
Tim Tyler
Detonator Sound
Richmond, Va USA
R72/32 laptop iPad Dir-815 Dante
Daniel –
Select the channel you wish to use for the “split” (iem) and then select its source, which would be “surface”, then “A”, then the number of the rca (5,6) in question. If you are using the 2 rcas as stereo input, perhaps set up a stereo channel for your purpose. Save the scene!
Tim Tyler
Detonator Sound
Richmond, Va USA
T112/48 R72/32 laptop iPad Dir-815 Dante
Your two scenes need to contain just the Patchbay. Use the scene edit function. This is how it is done on the iLive but I’m pretty sure it’s the same on GLD
Cheers
Richard Howey
Audio Dynamite Ltd
IDR48/IDR16/T112/R72/Mixpad,Tweak,
Dual M-Dante/DVS, 17″MBP/Logic 9/Custom Mackie Control
Lab Gruppen all the way! We run PLM1000Qs and the new IPD series
Jeremy Koch
Innovative Production Services – http://www.innovative.net.au
Current stock:
2x T112, 1x T80, 2x R72, 2x iDR-48, 3x iDR-16, 2x xDR-16
4x Dante Cards, 3x ACE Cards
