multiple FX with footswitch board

Forums › Forums › CQ Forums › CQ General Discussions › multiple FX with footswitch board

Tagged: 

This topic contains 5 replies, has 3 voices, and was last updated by Profile photo of Lee7 Lee7 2 weeks, 4 days ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • 2024/05/23 at 10:25 am #122306
    Profile photo of Keis
    Keis
    Participant

    Hi,
    I waiting for my newly ordered CQ18t.
    Is it possible to attach a board with 4 footswitches to control different FX and mute/unmute to the CQ18t?
    kind regards,
    Keis

    2024/05/23 at 10:41 pm #122332
    Profile photo of plastic_soul
    plastic_soul
    Participant

    It has a single footswitch input. If you connect with a TRS cable you can have 2 footswitches. If you get a little creative, each scene can control different FX with those footswitches.

    2024/05/24 at 5:55 am #122335
    Profile photo of Keis
    Keis
    Participant

    Ok. Clear!

    Any recommandations on footswitches?

    2024/05/27 at 11:29 pm #122409
    Profile photo of plastic_soul
    plastic_soul
    Participant

    I use my guitar pedal instead of a dedicated footswitch. In my case, it’s the Line 6 HX Effects, but any multi-FX pedal above entry-level should have an “amp ctrl” output. The nice thing about the Line 6 is that you can trigger entire scenes (guitar tones, amps/cabs, and CQ scenes) with a single stomp.

    2024/05/28 at 6:55 am #122415
    Profile photo of Keis
    Keis
    Participant

    Ad this is on the CQ18t? Is the Line6 differently recognized then a “simple” stompbox?

    2024/05/28 at 4:02 pm #122424
    Profile photo of Lee7
    Lee7
    Participant

    I use a Boss FS-6 to mute FX and start our USB intro’s. Works a treat.

    🙂

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.