[ddff_lvParticipant]

Well, the CF card does not erase itself, it just fails. I have done the restoration process several times and honestly think the CF was not a good idea even back then.

[ddff_lvParticipant]

The Waves bypass you can make with 2 scenes that only disable inserts and change the function of particular softkey. So you have a toggle button inserts on/off

[ddff_lvParticipant]

Just had the same issue- SBC can bet ordered from A&H via your distributor/dealer. Not cheap though- 1100 – 1200€ depending on modification.

[ddff_lvParticipant]

That is true, the parts are really catalog items, nothing fancy.

[ddff_lvParticipant]

No, surface does not boot at all. I guess it will when I’ll replace the SBC. Question is how to get shows off the old SBC.

[ddff_lvParticipant]

Still actual? I might look up the kit code

[ddff_lvParticipant]

You can set it in scene settings. While scene is loaded you’ll see the banner in the top left corner.

[ddff_lvParticipant]

Never mind- after the reboot of Bome box it just worked.

[ddff_lvParticipant]

By the way, has anything changed in couple of latest FW regarding MIDI?
I’ve tested my show with Bome box, that worked year ago, but desk can’t seem to get programm change messages. Bome box sees the desk, has both routes active, I even upgraded FW in it, but no luck.
Maybe I’m missing something obvious?

[ddff_lvParticipant]

Andre S – there are plenty consoles with RTC out there if that is crucial for your application. As RTC is a piece of hardware, it is very unlikely there will be a mod to add this to the SQ.

[ddff_lvParticipant]

DHCP is not good any idea anyway. Huge sticker with IP on every device. Works without a chrystal ball.

[ddff_lvParticipant]

No, CDM does not work with AB and AR boxes.

[ddff_lvParticipant]

Right, I see now.
I guess Digico has an option to chose DCA behaviours and moving faders of DCA members is one of them. I wouldn’t use it, but as an option- why not.

[ddff_lvParticipant]

MCA for main mix is called DCA, and it is there.

[ddff_lvParticipant]

Well, here is one mixing class setup I just wired up: https://youtu.be/2_tx4AK7qYI

[Author]

Posts