Forum Replies Created

Viewing 15 posts - 1 through 15 (of 495 total)
  • Author
    Posts
  • #85800
    Profile photo of ddff_lv
    ddff_lv
    Participant

    Just had the same issue- SBC can bet ordered from A&H via your distributor/dealer. Not cheap though- 1100 – 1200€ depending on modification.

    #85607
    Profile photo of ddff_lv
    ddff_lv
    Participant

    That is true, the parts are really catalog items, nothing fancy.

    #85605
    Profile photo of ddff_lv
    ddff_lv
    Participant

    No, surface does not boot at all. I guess it will when I’ll replace the SBC. Question is how to get shows off the old SBC.

    #85585
    Profile photo of ddff_lv
    ddff_lv
    Participant

    Still actual? I might look up the kit code

    #85426
    Profile photo of ddff_lv
    ddff_lv
    Participant

    You can set it in scene settings. While scene is loaded you’ll see the banner in the top left corner.

    #85031
    Profile photo of ddff_lv
    ddff_lv
    Participant

    Never mind- after the reboot of Bome box it just worked.

    #85020
    Profile photo of ddff_lv
    ddff_lv
    Participant

    By the way, has anything changed in couple of latest FW regarding MIDI?
    I’ve tested my show with Bome box, that worked year ago, but desk can’t seem to get programm change messages. Bome box sees the desk, has both routes active, I even upgraded FW in it, but no luck.
    Maybe I’m missing something obvious?

    #83235
    Profile photo of ddff_lv
    ddff_lv
    Participant

    Andre S – there are plenty consoles with RTC out there if that is crucial for your application. As RTC is a piece of hardware, it is very unlikely there will be a mod to add this to the SQ.

    #83218
    Profile photo of ddff_lv
    ddff_lv
    Participant

    DHCP is not good any idea anyway. Huge sticker with IP on every device. Works without a chrystal ball.

    #83021
    Profile photo of ddff_lv
    ddff_lv
    Participant

    No, CDM does not work with AB and AR boxes.

    #82966
    Profile photo of ddff_lv
    ddff_lv
    Participant

    Right, I see now.
    I guess Digico has an option to chose DCA behaviours and moving faders of DCA members is one of them. I wouldn’t use it, but as an option- why not.

    #82947
    Profile photo of ddff_lv
    ddff_lv
    Participant

    MCA for main mix is called DCA, and it is there.

    #82897
    Profile photo of ddff_lv
    ddff_lv
    Participant

    Well, here is one mixing class setup I just wired up: https://youtu.be/2_tx4AK7qYI

    #82576
    Profile photo of ddff_lv
    ddff_lv
    Participant

    Normal. Because recorders use dBFS scale, that stops at 0, but dLive and SQ are in dBu. And on these desks 0dBu happen to be at -18 dBFS. So you have 18 dB of headroom.

    #82529
    Profile photo of ddff_lv
    ddff_lv
    Participant

    If by network port you mean the one in Dante or Waves card, then yes you can record from it. Not from built-in network port that is used for control data only.

Viewing 15 posts - 1 through 15 (of 495 total)