[Art]

So is the card going into the slot where, for example, my Waves card resides on my CDM32, or is it able to be inserted elsewhere so that I can keep my Waves card, too?

[Art]

Wow! What an interesting problem and an interesting solution. I had the same issue and resolved it the same way. Thanks!

[Art]

Since I don’t have an SQ in front of me, you used to be able to have a Softkey strip of softkeys 1-4, 5-8, etc. in Mixpad, but of course, not on a console. Is that still available on Mixpad?

[Art]

Funny you should ask this question because I was looking for this answer, too. I have an older version of SQ Mixpad on an Android tablet that has Softkeys available in the setup screen for your layers. But it doesn’t seem to be there anymore.

Anyone have an answer for this?

[Art]

I ended up buying a case from swanflight.com. https://www.swanflight.com/search/c1500

[Art]

@Mike, which version of Soundgrid Studio are you using? Version 12 or an older version?

[Art]

There are simple hacks on-line that open up the Fire tablets to the entire Google Play Store (since they are Android-based systems). I hacked mine a couple of years ago when I got an SQ and it’s worked flawlessly since. Google it and follow the simple instructions.

[Art]

I think I’ve heard others say that, too. I’ll be on a Surface Book 2 tonight. I’ll try it.

[Art]

According to my inventory list, they’re due in December. However, they will be shipped to customers in the order that the orders were received.

Art

[Art]

It’s possible to do. I have done it. (But it is not supported by A&H.) What you need is a wireless access point to provide a bridge to your wireless network. Connect the WAP to your network. Then connect the IP-8 to the WAP and you’re good to go.

Art

[Art]

I had the same problem. It’s in the Soundgrid Driver Buffer. Bump that up to 1088 (or as high as it will go) and this should solve your issue.

Art

[Art]

You should be able to use any of their servers. You probably won’t hit it too hard, even with the small one. The most CPU intensive plugins are the H-Verb and H-Delay.

[Art]

For those, you’d need the Waves card and a Waves server or your latency would be too high.

[Art]

Without the Waves card and Waves server, you’re going to introduce a lot of latency, so you’d be only able to use plugins like reverb and delay.

What were you wanting to use?

On the other hand, if you had a Waves card in the SQ and a Waves card in the GLD, you’d be able to accomplish what you wanted with low latency (assuming you also had a Waves server).

Art

[Art]

Have you upgraded the firmware to 1.4.1? I understand that fixed the problem.

[Author]

Posts