[JCParticipant]

Thanks Gab!

`I still don’t get it… When assigning channels direct to subgroups I used the Routing page and for ex kick, snare etc Main- off, Aux 1 to 4 – on (monitors) and subgroup Dr – on, this goes on for the whole band (15 channels). This works fine and I also have two DCA’s (one for all IP-channels and one for all Subgroups)

But when it comes to FX I’m not sure. I need to send IP channels to the first two different fx (FX 1 and 2) with the return to all subgoups. For ex the vocals, keyboard and guitars send to fx 1 and I would like the FX 1 return to go to Subvox, Subkeys and Subguit.

Where can I find the FX 1 return for these three different subgroups?

I hope my question makes any sense:) Or maybe I have got things all wrong regarding the sends and returns, I just can’t find where and how to rout the FX returns to three subgroups.

Returning fx to aux/monitors works great, because here I can see the fx returns on layer B in each of the four monitormixes (mix 1-4), and can just adjust the returns I would like to get just raising faders to 0 (the once I will not use in each mix I just keep fully down)
It seems to work anyway..
I have aux 1-4 as mon mix and the mix select 5 -10 as Groups – but when pressing any mix select knob from 5 to 10 (my groups) it has the same settings as the main LR – except the Masterfader.

I.e. when for ex Mix Select 10 (subgr Vox) is selected and I change the fader level on for ex FX return 1 all way down, the same happens with the fx return 1 if going back to Mix Select main LR –and versa.

As you understand, any assistans would be great of help!

[JCParticipant]

gig tomorrow, anyone?

[JCParticipant]

gig tomorrow, anyone?

[JCParticipant]

Hi again!
Will the QU compability data base that list USB devices tested on QU mixers work as well for the SQ mixers?

[JCParticipant]

Thank you again Steffen R for your always humle replies:) But maybe you are the Moderator here

Unfortunately I missad out that there were no spectrum analyser on the SQ, for me this so obvious but I couldn’t find anything about it in the manual or i the videos so I just posted a question here

Has anyone heard anything if this is something that A&H are considering in the near future?

[JCParticipant]

Hi Steffen!

In the digital domain there are many pro compressors plugins that have this function. It´s just what´s mentioned, you can decide if it´s more or less linked or unlinked (like a parallel compression knob).

[JCParticipant]

Hi Steffen!

In the digital domain there are many pro compressors plugins that have this function. It´s just what´s mentioned, you can decide if it´s more or less linked or unlinked (like a parallel compression knob).

[JCParticipant]

Thanks for the replies!
For me unlinked stereo compressors on some of the subgroups make great sense. But I assume that the compressors avalible today for the sq mixer don’t have this link/unlinked function, also with variabel link/unlinked mode.

[JCParticipant]

Hi!

Maybe someone from AH can jump in? I had a qu24 until two moths ago, and just got a new FOH gig.. Want to know what is working with the SQ as above or just keep on with the new bands old MixW 16-2 and carry around my own racks with PEQs, compressors etc for some time:). If getting a new mixer I definately would like to get something that can match the specs above.

[JCParticipant]

Hi, and thanks for your answers!

On some of the subgroups it quite crucial for me with an option to have unlinked stereo compression, especially on the groups. Because I really would like to have more group options, using mono will even decrease what is avalible (I have 4 aux to monitors and as I understand this give me 8 possible stereo subgroups possibilites). When mixing and mastering all my compressor plugins have the link/unlink options and also a variable for more or less etc).

Do you think that AH might come up with a compressor that will be able to do this? That would certainly help, because linked stereo compressors will certainly (at least for me) mess up my intended stereo/soundfield image for certain groups.

I also had a question earlier today regarding routing from channels to subgroups to LR. No respons yet, maybe you have an idea?

Thanks anyway for your input!

/JC

[JCParticipant]

Thanks for the response!

Can I use any of my external Preamp passing the once in the board? There is no inserts so is this possible.. I do some akoustic recordings live, and usually would like to use some of my own preamps for a few instruments.
/JC

[JCParticipant]

Thanks for the info!

Any thoughts about the DAW recording issue?

[Author]

Posts