[garyhParticipant]

If you’re not using all the FX slots for LR, you can set up a separate one just for that particular mix. Just unassign the return to everything but that mix.

[garyhParticipant]

I’ve used the free Waves Tracks Live on a Windows laptop with great success. You can create templates for different gigs with track names that are also the names of the track file names. It was created for live recording and playback so it’s easier to set up than a full featured DAW.

[garyhParticipant]

Dust buildup? If there are heat sinks inside, maybe came loose? Loose wire that manifests at high temp?

[garyhParticipant]

Use a Theatrical control app on your Mac that can control your soundboard with MIDI.

[garyhParticipant]

With a stage box you can send L+R to an output. Without a stage box you would need to make or buy a stereo to mono outboard device.

[garyhParticipant]

Be aware that using the QU with the SQ will limit audio to 48Khz.

[garyhParticipant]

Rolls PM50se Personal Monitor Amp

It has an XLR pass-thru along with stereo monitor input, so your “base mix” would come in on the monitor input and the XLR pass-thru sends the signal from your mic or instrument to the board but also allows you to boost it’s level in your in-ear/headphones/etc. for a semi-custom “more me” mix.

[garyhParticipant]

Is channel 10 assigned to the mixes you’re trying to adjust?

[garyhParticipant]

What happens if you link channels 9 & 10 and move either fader on the iPad?

[garyhParticipant]

Make sure the camera does not have auto gain control engaged.

[garyhParticipant]

There is an app for Windows called Mixing Station. It’s not free though.

[garyhParticipant]

Can you connect using an iPad? Save your console settings by saving a show to a usb drive then do a factory reset.

[garyhParticipant]

Try changing the channel on the router. You can get a network analyzer app for your phone to see which channels are being used at your venue.

[garyhParticipant]

Did you try ST1 and ST3 on the QU-24? Sounds like a dirty or loose connection on ST2.

[garyhParticipant]

Mixing Station has a desktop/laptop version. No emulator needed.

[Author]

Posts