[nottooloudParticipant]

A&H delays can’t do full regeneration on their own. The only way to get 100% or more as an effect is to send the delay to itself.

[nottooloudParticipant]

Of course that was it.

[nottooloudParticipant]

Here’s the obligatory “Mixing Station shows you that” as a workaround suggestion.

[nottooloudParticipant]

Just stopping in here to say that entire bunch of y’all are pretty tiresome. Except, of course, @keithjah.

[nottooloudParticipant]

https://www.allen-heath.com/media/CQ_User_Guide_V1_1_0_iss1.pdf

[nottooloudParticipant]

I understand. But manufacturer’s initial choice of frequencies and bandwidths never make sense to me. I generally want something along the lines of 120, 1k, 3k, and 6k, all fairly narrow. I have that as a saved preset.

[nottooloudParticipant]

Not likely. Device count limitations on SQ and Qu are from overloading the network stack.

[nottooloudParticipant]

Recalling a preset you saved is more likely to get what you want. I’ve never seen a manufacturer’s PEQ default that worked for me.

[nottooloudParticipant]

A&H rec/playback has a very limited feature set. Using a laptop DAW is way more flexible.

[nottooloudParticipant]

Record some tracks to the SD card. That will show you how to format them. If CQ is like the other A&H mixers, there is a very limited spec as to what will play.

That’s just for playback, though. You’ll need to go USB to a DAW to do multitrack overdub recording, which is what you’re asking about. Reaper is cheap and excellent.

[nottooloudParticipant]

How are you getting collisions without the networks seeing each other? Are you connecting a computer to both your home network and the mixer wifi?

[nottooloudParticipant]

If you’re using the access point, why is it connected to your local network?

[nottooloudParticipant]

clear indication of sub std I/Os for what ever reason.

So is it your contention that they intentionally crippled this product, which you haven’t heard, with mediocre A/Ds and substandard software? All that stuff is simply math now.It would cost them more *not* to use their existing processing algorithms.

[nottooloudParticipant]

I’d use a Dante card if I were you and use a Dante network to route all these. Would be a good solution for your situation.

That wouldn’t address the need for different processing, but any 4×8 general signal processor would.

[nottooloudParticipant]

opposite end of the sonic quality scale that I have addressed with my mini Avantis request!

I think they were aiming for the X-Air and missed on features, but as for quality, it’s 96K FPGA inside.

[Author]

Posts