Forum Replies Created
-
AuthorPosts
-
2010/08/02 at 2:15 am #25979
Can I revisit having a width control on stereo channels please?
Duncan Whitcombe
Mirror Sounds & metrochurch
Perth, Australia
T112, iDR48x2, Dante soon
http://www.mirrorsounds.com.au
http://www.metrochurch.org.au2010/07/27 at 4:48 pm #26018Your market lead time is dwindling, so enjoy it while it is there. there are lighting remotes and remotes for DAWs already e.g. DP, Logic & ProTools.
Duncan Whitcombe
Mirror Sounds & metrochurch
Perth, Australia
T112, iDR48x2, Dante soon
http://www.mirrorsounds.com.au
http://www.metrochurch.org.au2010/07/26 at 5:42 pm #26004Works – yay! perfect timing, we were able to get the upgrade in and set up and tested before the next service (thanks Ryanp).
Duncan Whitcombe
Mirror Sounds & metrochurch
Perth, Australia
T112, iDR48x2, Dante soon
http://www.mirrorsounds.com.au
http://www.metrochurch.org.au2010/07/26 at 5:37 pm #26003I hadn’t noticed the release time – cool.
Duncan Whitcombe
Mirror Sounds & metrochurch
Perth, Australia
T112, iDR48x2, Dante soon
http://www.mirrorsounds.com.au
http://www.metrochurch.org.au2010/07/20 at 5:12 pm #25927check that the subs and top boxes are on the correct amplifiers and are being fed by the right signal. if you are doing our trick and using two matrices for Subs and top boxes you may have the outputs incorrectly wired or swapped on the front.
or a faulty cable or two…
i.e. the fault may not be in the desk will probably be after your frequency dividing device (Desk/X-over/2 wire Speakon for a 4 wire requirement)
2010/07/20 at 5:09 pm #25926I have been really talking up the Dante option for us too. We have sound from playback devices for background / pre-service, then feed to and from the video / CG area plus a requirement for other recording. plus other ins and outs around the building – cafe, overflow, balcony, …
I look forward to when it comes – we’ll almost definitely want a couple of slot B cards.
Yours expectantly,
Duncan
2010/07/20 at 5:01 pm #25924can’t you just have a series of scenes with similar channel strip layouts but with the changes you require?
2010/07/19 at 4:17 pm #25917Yay!
I wait with bated breath.
that will be excellent.
thanks
2010/07/18 at 12:33 pm #25914Found it – it is in 1.61, I need to right click on the mix button not the mix channel. sweet!
2010/07/18 at 12:30 pm #25913Found something else:
Can we have the direct output able to be set different for different channels e.g. Prefader for ch 41 and post fader for ch 50 rather than just a global one.
I use some for feeding FX and some for feeding the ‘more me’ channel for the IEM.
thanks.
2010/07/16 at 10:04 am #25910excellent, I’ll fire it up and have a look.
2010/07/14 at 9:12 am #25899does that actually copy all the fader settings for mix or just the processing for that mix output as it does on 1.61?
2010/07/14 at 8:58 am #25898We have some as DCA mutes (for those instruments that people love to unplug quickly) and tap tempo for the DDL. I did try as Mix masters like I had done on the M7CL but as we now have about a dozen aux sends now, that didn’t really work so we changed it.
2010/05/23 at 1:57 pm #25669Having had one T112/iDR48 (well two really – the first got water damaged) for close to 6 months now at our church, it is still great. We have our own strip layouts and I am getting into using scenes to quickly change for items and will be setting up scenes for FX changes for particular songs.
We will be rebuilding our config from the ground up now that things have settled and look forward to plenty of happy services.
2010/04/12 at 4:59 am #25459Thanks for this. I’ll check out the Library manager tonight. I have used it to archive to USB and then Archive off the USB on my laptop but I will check out what else I can do on-touch.
thanks.
Duncan
-
AuthorPosts