[Lieven-DewispelaereParticipant]

HI, a had the same problem but it was not on a GLD but on the older ILive T112. There was only one VGA output on these models and when i connected a monitor/keyboard/mouse to it and started i could log into the bios ( F2 or something simmilar) to change the video resolution to 600*480 i think. saved with F10 and restarted an the onboard screen got immage again. Be sure to set your external display to auto select video resolution. I don’t remember if mine had lights at startup but find it strange that your board does not start up with lights because the dispaly resolution has nothing to do with the other systems.

[Lieven-DewispelaereParticipant]

When you have the white screen you have to first replace the backup battery on the mainboard who is located under the touchscreen.
unfortunately this is soldered to the mainboard. I removed it and soldered two leads with a battery holder for future easy replacement. i think it is a CR2032 but it is indicated on the old battery.
Then you have to connect a keyboard and monitor screen to the usb/vga-output.
When you power on the surface you have to enter the BIOS for the mainboard ( press F2 or F10 or something: it is indicated on the startupscreen)
go into the video screen settings and change the resolution to 800*640 (SVGA?) save and restart. touchscreen should be working normal.
Lieven

[Lieven-DewispelaereParticipant]

Steffen, i can only select Mix and not automatically pafl that mix. that is what i want and if i remember correct could do on my Ilive system. especially when i use my dlive as monitorboard.
I want that cue in my wedge or ears when i select a mix without first pressing the pafl.
the color change could also work but may be confusing.
They just have to give the possibility for Mix/Pafl/sceneselect without the Sel
Lieven

[Lieven-DewispelaereParticipant]

There should be an option to use Mix/Pafl/scene instead of Sel/Mix/pafl/scene where the softkey turns blue when selected and stays that way while in send on faders for that mix.
I am aware that is normal that the green led goes out when i select another channel.The biggest problem is that after i select another channel i can not go out of the send on faders mode by pressing the softkey for that mix again. When i press it, the softkey lights up green but i am still in that mix so i have to press it twice to go back to the main mix.
Lieven

[Lieven-DewispelaereParticipant]

Ray, yes select/mix/pafl/scene and type is mix/pafl. When i press that softkey it does behave as it should but when i then select a channel with the select-button to edit something on that channel the softkey led goes out.

[Lieven-DewispelaereParticipant]

I did assign mix/pafl/scene because i want to AFL the mix that i select.the button does go green and not blue. But i don’t see any reason why the green led should go out when i select another channel to edit while i am still in that mix ( send on faders)
I do not select the mix button for that channel. The softkey should stay green until i select it again to exit that mix. very confusing for guest engineers and not logical in my opinion. The main problem is that i loose the visual indication on the softkey that i am in a specific mix and not in the main mix. And to get back to the main mix i have to select that specific or any softkey asigned to a mix, twice. Try it and you will see.
The same thing happens in director
Lieven

[Lieven-DewispelaereParticipant]

Had the same problem on my T112. It was an empty backup battery CR2032 on the main pcb.
I desoldered and soldered 2 leads with a battery holder.
Now i can remove the side plate and pop in a new one when i get the white screen.You have to change some screen resolution 600*800 settings in Bios after replacing battery. Attach keyboard and mouse and go into bios settings at startup.
The battery drains down quickly because the T112 sits in the shop more than it goes out.( i have a pro2C now).Had to change 2 times already.
Same here ,more problems with the T112 ( screen,battery, had to replace all caps on the switches) then the R72.
R72/idr48 is my little work horse.
Think the new generation Q en GLD are better mechanical /component wise.
ilive is still very configurable setup and the effects are top notch. Whish i had the same effects on my pro2C

Lieven

[Lieven-DewispelaereParticipant]

Tablet is all wel but i bought the I-pad because i have other digital mixers to control.
and i find editor a little bit cramped on a tablet.
The biggest grieve is that we don’t get a straight answer from A&H if it ever will be possible in the (near) future.
This question has been asked many times but always answered with silence from A&H.

Lieven

[Lieven-DewispelaereParticipant]

It’s the cmos backup battery. Had the Same problem!
White screen and afther several powercycles came back to live.
But in the end the White screen stayed
If You search the forum there are some topics About that.

Lieven

T112/IDR48/R72/IDR16/xDR16/2ACEcards/IPad1
Save a tree, eat a beaver

[Lieven-DewispelaereParticipant]

Hi, mine broke recently , socket B1(input 9), the same problem, at some positions strong signal.
i swapped the input card wit the E card. so now channel 41 isn’t working but i don’t use it.

Lieven

T112/IDR48/R72/IDR16/xDR16/2ACEcards/IPad1
Save a tree, eat a beaver

[Lieven-DewispelaereParticipant]

Hi , Willy
Do you use a UPS with the GLD? Digital desk are sensitive for power spikes and sag.
I recommend using one. Don’t know if in your case that is the problem but i would do it anyway.

Lieven

T112/IDR48/R72/IDR16/xDR16/2ACEcards/IPad1
Save a tree, eat a beaver

[Lieven-DewispelaereParticipant]

HI, i had the same thing. at boot-up white screen. I found out that is was the backup battery.
Should indeed last 10 years. but my problem is that i don’t use the surface that often. not as a PC that is on all the time.
When the surface is off the BIOS backup is using the battery . When the surface is on the BIOS backup system use the normal power and don’t use the backup battery, at least not that much. That explains why the backup battery went dead after 3 years.
I replaced it an had no problem since. i installed two leads with a holder so i could replace it easier the next time because the standard battery is solderd on to the touchscreen PC

after replacing the battery there are some specific setting you need to change in the bios. you have to connect a mouse and keyboard and at startup go into BIOS an change screen resolution setting. i think 600*800 but it is stated in another post.

if you have good soldering skills you can do it yourself. or let someone do it.
It is al lot less expensive ( 7 euro for holder and battery) than a new touchscreen pc []

Lieven

T112/IDR48/R72/IDR16/xDR16/2ACEcards/IPad1
Save a tree, eat a beaver

[Lieven-DewispelaereParticipant]

In the FX section there is DFX (dynamic FX shaper ) There you can gate/duck that effect.
The only thing is that its after the FX and not at the input.( i presume)
Still may be useful for what you ‘r trying to accomplice
Or you could send the inputs to a group an then gate that group and send it to the FX

Lieven

T112/IDR48/R72/IDR16/xDR16/2ACEcards/IPad1
Save a tree, eat a beaver

[Lieven-DewispelaereParticipant]

Network problem/glitch ?

Lieven

T112/IDR48/R72/IDR16/xDR16/2ACEcards/IPad1
Save a tree, eat a beaver

[Lieven-DewispelaereParticipant]

OK, i switched the preamp boards and now the bad preamp is on channel 41 which i don’t use that often.
So we see where it goes. I rather changed the boards than always have to make sure channel 9 is on another preamp socket.

Thanks

Lieven

T112/IDR48/R72/IDR16/xDR16/2ACEcards/IPad1
Save a tree, eat a beaver

[Author]

Posts