[TimParticipant]

Thanks Harry,

I did try a small drive that I laying around that and was able to use to update the firmware to 1.9, but it will not work for recording. Even after the firmware update the Integral drive did not work. When I get a chance I will input the device information into the database.

Tim

[TimParticipant]

I could use some help, I recently purchased the Integral 128 SSD based on both the verified working drives and an Amazon review stating that this drive works with the Qu-32. I can’t get the system to recognize the drive. The SSD is granted power (as evident by the LED on the system and the drive) but it turns off within 2 seconds and shows no usb disk present. I verified that the drive is formatted to FAT32 (both out of the box and after a reformat using both a PC with no luck, then using a MAC) and have not been able to get it to be recognized.

I currently have firmware version 1.8

Thank you in advance for your help!

[Author]

Posts