Is that via a Dante128 or Dante64 card with the network bridge turned on2?
In my Avantis (v1.3) environment,
I could not use this feature via Dante128 card v3 and could only find Shure’s ULXD4D receiver (v2.7.x) when physically connected to the network terminal (RJ45).
It seems dangerous to have to do something so complicated that it encourages operational errors.
It could be in the form of a dPack option where NEQ (12-band PEQ) would be added to the monitor relationship as well.
There are many operators who need EQ.
Hopefully the Allen & Heath development team can help.
Hello,
The DT series HA remote capable products are currently only controllable on the PRIMARY line. Unfortunately, secondary lines are not supported. (Similar to the YAMAHA Tio1608-D and D2)
This is the first drawback.
Avantis has 12 faders per unit, so having 12 colors to choose from would improve visibility.
Even in v1.3, most of the coloring is consumed by Bus, DCA, INPUT and FX in the presets.
We hope you will consider increasing the number of channel colors in the next update.
+1
I feel that it is a necessity for the DM0 to import and playback audio via USB-A.
I would also like to see an I/O option card that has a USB-A as well as a USB-B port with multi-track USB-Audio interface capability.
+1
+1
I’ll say it again…
Avantis input ch settings require a ‘Post Fader Insert Point’ option.
Dugan is not the only objective.
There are times when you want to control the overall volume after inserting a Reverb effect, for example, and creating a balance with the Dry/Wet knob.
Or to add reverberation to a sound source of water droplets falling on the surface of water.
Other times, when you want to have a compressor with post-fader inserts for a speech that alternately repeats loud and quiet voices.
The sound will not be over-compressed, and the quality of the sound can be assured even when a whisper suddenly changes to a loud voice.
We would love to see this implemented in Avantis and dLive.
+1 (Request 1)
A touchscreen-optimized mixing console would be a great relief if the mouse cursor could cover critical areas.
+1
+1
DT4816 (Dante model GX4816)
One additional request: the PAN of Sends from CH to Stereo Aux is also not displayed accurately in numerical values.
This is very annoying when working with IEM.
+1
+1
dLive/Avantis Card!
Thanks.
Is it still the quickest way to load the default Show and reset the parts that are not involved in the Show in a nonchalant manner?
SQ clearly stated how to press [EQ in]+[HF].
https://support.allen-heath.com/hc/en-gb/articles/4402934178961-SQ-Hard-reset