[Tatsuya NakamuraParticipant]

+1

[Tatsuya NakamuraParticipant]

Operators would also appreciate the ability to copy and paste text when saving scenes.

Attachments:

You must be logged in to view attached files.

[Tatsuya NakamuraParticipant]

+1 !!!!

[Tatsuya NakamuraParticipant]

Unfortunately, for all Stereo Aux and Stereo Grp, it is not possible to solve the problem by setting the Fx remainder or Main L/R fader strip settings.

I look forward to the update.

[Tatsuya NakamuraParticipant]

+1

[Tatsuya NakamuraParticipant]

+1

[Tatsuya NakamuraParticipant]

+1 (dLive & Avantis)

[Tatsuya NakamuraParticipant]

+1

It is always an advantage to have a common time reference for all devices used during a show.

Especially when using multiple devices, it also helps when checking for errors in Log.

NTP for dLive and Avantis!

[Tatsuya NakamuraParticipant]

It seems that this was a problem that the Dante128V3 card was having.

Updating the V3 card from v1.0.1 to v1.0.2 should resolve the issue and make the Shure device visible.

Many thanks to the A&H support team.

Attachments:

You must be logged in to view attached files.

[Tatsuya NakamuraParticipant]

I am pleased to see the addition of the feature from v1.3 that allows scene names to be displayed at all times.

The way to set it up is to press options on the scene screen.

There is a minor issue with DCA and text overlapping.

Attachments:

You must be logged in to view attached files.

[Tatsuya NakamuraParticipant]

I am hoping that a simple NEQ (12Band PEQ) will be added.

Attachments:

You must be logged in to view attached files.

[Tatsuya NakamuraParticipant]

+1

Even an add-on to SQ!

[Tatsuya NakamuraParticipant]

+1

This is a very necessary feature for performances held in theaters and playhouses.

I too would be happy to be able to touch it right away instead of in the depths of the setup.

It would be nice to be able to use softkey to change to a saved brightness state.

[Tatsuya NakamuraParticipant]

Is that via a Dante128 or Dante64 card with the network bridge turned on2?

In my Avantis (v1.3) environment,
I could not use this feature via Dante128 card v3 and could only find Shure’s ULXD4D receiver (v2.7.x) when physically connected to the network terminal (RJ45).

[Tatsuya NakamuraParticipant]

It seems dangerous to have to do something so complicated that it encourages operational errors.

It could be in the form of a dPack option where NEQ (12-band PEQ) would be added to the monitor relationship as well.

There are many operators who need EQ.

Hopefully the Allen & Heath development team can help.

[Author]

Posts