Forum Replies Created
-
AuthorPosts
-
2018/08/22 at 4:38 pm #73502
Found it thanks. Why isn’t this setting at a global level and not on each and every channel? Boggles the mind.
2018/08/22 at 4:37 pm #73501Thank you so much. It worked perfectly. Why on earth Allen and Heath thought putting those GLOBAL settings under each channel boggles my mind. Thanks again.
2014/01/25 at 6:35 am #37397For reference GCumbee, this is the one I am using on our GLD-80 https://www.tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=2581141&SRCCODE=WEBGOOPA&cm_mmc_o=mH4CjC7BBTkwCjCV1-CjCE&gclid=COfw5KzZmLwCFUhgMgodrB0AgA and it works great. (if you ever need a POE switch for some ME-1’s)
2014/01/25 at 6:29 am #37394Thanks Nicola… but I already knew I could use a third party POE switch… I am using a Trendnet something or other unit now with our GLD-80 and 7 ME-1’s… BUT I also am using a 2412.
What I want to know is can I do this…
QU-16 dSnake Port —–> Compatible POE Switch ——> ME-1’s
OR do I have to have a 2412 in the mix like this….
QU-16 dSnake Port ——-> AR2412 ———-> Compatible POE Switch ———> ME-1’s
Thanks so much!
2014/01/24 at 11:38 pm #37388I actually called a guy that we bought our GLD-80 from and he is going to try and contact the A&H rep and find out this info. It appears you can definately daisy-chain ME-1’s from the dSnake port, but this requires the use of “wall-warts”… I am hoping he says we can go from dSnake to POE switch then to ME-1’s… that would be an INCREDIBLE cost savings!
2014/01/24 at 6:39 pm #37377So come out of the board to an ME-U THEN to the ME-1’s and it will work??
2014/01/24 at 5:09 pm #37374Hmmmm… so dSnake to POE switch, then to ME-1’s?? So, if the “make” or “model” plays nice with the QU board it should work then?
2013/07/15 at 6:25 pm #34461quote:
Originally posted by nicolaHi joeymauro,
You can patch a number of things to connected ME-1s, including surface inputs, by using the Monitor tab in the I/O screen. To route the USB audio to ME-1 for example, select the required Monitor output, then choose USB Play from the drop-down menu.
Hope this helps,
Nicola
This is on the board itself or on the ME-1??
2013/07/05 at 8:01 pm #34374When I went to buy a POE switch the Allen & Heath Rep told me to make sure I bought unmanaged….
2013/07/05 at 5:55 pm #34371But then I lose my graphic equalizer right?
quote:
Originally posted by Chris93If you’re going to do that you don’t need to use an aux mix to do it. Just assign a direct out from the channel to the output socket.
EDIT: And make the direct out post fader and post mute.
Chris
2013/07/05 at 3:24 pm #34366I figured out how I am going to do it!!!
It still involves an output… but send the mix from the ME-1 to one of the inputs on the 2412, then give it a channel number, then assign that channel to an aux out… then send the aux out to the amp!!
That way it has to go through me to get to the monitor…. and that way I can mute a monitor if need be…. that was my goal… I didn’t really care about mix too much.
Thanks for the help… it got me to thinking of a way to make this work!
2013/07/05 at 2:50 pm #34363So no way to control monitors from both the me-1 and the console?? Like if someone walks away from their instirment and leaves it blaring??
-
AuthorPosts