Me500 and qu16

Forums › Forums › Qu Forums › Qu general discussions › Me500 and qu16

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of joeymauro joeymauro 5 years, 8 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2018/08/21 at 6:55 pm #73487
    Profile photo of joeymauro
    joeymauro
    Participant

    I have a qu16 and an me500. I plugged into the dsnake port and the me500 works. However it only works post fader. Any way to make the me500 work pre fader in this setup? Thanks so much.

    2018/08/21 at 10:10 pm #73488
    Profile photo of Rob
    Rob
    Participant

    On the routing screen of the Qu16, you can change the Global Direct out settings to toggle Follow fader off.

    2018/08/22 at 4:38 pm #73502
    Profile photo of joeymauro
    joeymauro
    Participant

    Found it thanks. Why isn’t this setting at a global level and not on each and every channel? Boggles the mind.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.