Forum Replies Created
-
AuthorPosts
-
2012/03/02 at 7:09 am #298002012/02/24 at 3:00 pm #29687
hi all!
… white noise is the best stimulus you can use for such measurements
why? because you have equal power within a fixed bandwidth – music will be more randomly, of course!and no – the software does not correct the internal latency – so it is like it is!
greetz,
andreas—
andreas putz
foh engineer
office@inlinemedia.at2012/02/23 at 7:44 am #29678… why should i keep it by myself?? i wrote that anybody can have this sheet …
here it is – especially for you, graham
https://www.andreas-putz.com/tech_files.html
greetz,
andee—
andreas putz
foh engineer
office@inlinemedia.at2012/02/22 at 6:04 pm #29673@ graham: nice – but there are differences in latency if you use an aux, group, matrix, …
that’s why i made these measurements
greetz,
andee—
andreas putz
foh engineer
office@inlinemedia.at2012/02/22 at 7:53 am #29595hi!
i have done various time-measurements on my ilive
if someone wants that – please contact me!greetz,
andee—
andreas putz
foh engineer
office@inlinemedia.at2012/02/17 at 5:57 pm #29479hi!
thx for your responses
@ letmefix : that are exactly my thoughts, too!i will order one m-waves – cause it is possible to us it like dante cause of the sg driver … latency will be on focus !
looking forward to further posts…
best regards,
andee—
andreas putz
foh engineer
office@inlinemedia.at2012/02/14 at 12:57 pm #30233hi robert!
thank you once again good tips!
do you have a photo? would be very noce.greetz,
andee—
andreas putz
foh engineer
office@inlinemedia.at2012/02/13 at 4:47 pm #30227hi sam!
it’s me again
is it realistic, that those modules will be available soon or not?
please tell me that – if they do not come soon i have to buy the available modules and must do a digital-conversion ADAT <-> AES/EBU.greetz,
andee—
andreas putz
foh engineer
office@inlinemedia.at2012/02/13 at 3:16 pm #30225hi robert!
thank you! i’m with you – that make sense.
i have read your thread for waves multrack + dante … fine. and now i plan to do that, too.
the only issue is the minimum of 4ms latency for the ethernet-dvs.
is this in both directions (in plus out) or just e.g. in ?greetz,
andee—
andreas putz
foh engineer
office@inlinemedia.at2012/02/13 at 11:04 am #30223hi wouter!
sure – for recording i’ll do it like you mentioned.
but i try to take dante for my waves plugs – and these are at foh on my macbook.greetz,
andee—
andreas putz
foh engineer
office@inlinemedia.at2012/02/10 at 2:59 pm #30216hi sam & ian!
thank you very much – that helps a lot.
greetz,
andee—
andreas putz
foh engineer
office@inlinemedia.at2012/02/08 at 2:46 pm #301942012/01/18 at 7:50 pm #30152hi sam!
yes – if there is bundle-price for these 2 modules, it would be fine and thinkable for me.
kind regards,
andee—
andreas putz
foh engineer
office@inlinemedia.at2012/01/18 at 2:40 pm #30150hi sam!
thank you for your reply.
i mean a module for the 4x slots in the modular surface.
ONE module with 1x adat in AND 1x adat out – like the yamaha my-8at.
i need it to interface a audio-interface w/ adat-ports…kind regards,
andee—
andreas putz
foh engineer
office@inlinemedia.at2012/01/04 at 10:30 am #29654hi!
i’d like to have a slotcard for my modular-112 with 1x ADAT IN + 1x ADAT OUT … like the yammis have
that would be pretty cool for plugin’ in my waves multirack …greetz,
ND—
andreas putz
live-sound engineer
office@inlinemedia.at -
AuthorPosts