Click track routing

Forums Forums CQ Forums CQ General Discussions Click track routing

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of drummist67 drummist67 1 month ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #122254
    Profile photo of drummist67
    drummist67
    Participant

    Hi guys, new CQ20B owner here and loving this little unit already. I have very little mixer knowledge so please forgive me if this is a basic question. I want to play drums that are mic’d on Inputs 1 to 7 along to a click coming into the CQ through the inputs STIN. I want to hear the drums and the click in my IEMs and record the drums without the click to a stereo file using the built in USB stereo record.

    Please could somebody explain how to route the STIN channel that carries the click track so that the above is possible.

    Thanks

    Mark

    #122256
    Profile photo of Mike C
    Mike C
    Participant

    You would want to use a PRE FADE aux send for your IEMs. Doing that you can
    you can bring up the click in the IEM aux mix while leaving it turned down in the
    main stereo mix.

    #122278
    Profile photo of drummist67
    drummist67
    Participant

    Thanks Mike

    As a novice with routing, would you be able to step me through the process to do what you’ve recommended.

    Thanks

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.