Forum Replies Created
-
AuthorPosts
-
2017/10/03 at 4:42 pm #65512
Yes – thats not so good as it always produces feedbacks.
2017/09/03 at 3:13 pm #65099+1
2017/08/16 at 3:17 pm #64839I was in contact with A&H Support and they could reproduce the error. Its a big that will be fixed in near future i hope.
This is just happening if the IP8 (1 or 2 dont matter) has mixed Channels on its layer (a mix of Inputs, Mixbusses, FX…) and is assigned under the surface tab.
If assigned to the Mixrack its working fine.So buy a second IP8 – it gets fixed…
Albin
2017/08/08 at 9:09 am #64719Small update. It seems that Layer change is not working.
If i press a button this is working normal on the first layer.2017/08/07 at 4:28 pm #64702Yes, tried it as u said.
Also with one Controller.
I also tried another Switch – same behavior.
Also if i change the IPs from one IP8 to the other – no change. 1 keeps working – the other one not.
VideoI made a Video that shows that the moment i sync Director to the MixRack one IP8 stoos working. Weirdly – the other one keeps working.
2017/08/05 at 10:51 am #64664Hello Jack.
Did so – made no difference. Upgradet to 1.51 – also no difference.2017/07/19 at 5:12 am #64350Try the Waves Card v3 – this has all u want.
2017/07/19 at 5:11 am #64349Dante?
2017/07/19 at 5:08 am #64348I tried Tracks live with my Midas Pro1 (with the KlarTeknik 9650 and Dante Card) once and could not get it working correctly – had the same issue with double speed recordings.
Switched to Reaper and never had any problems – with the same constellation.
No i use an CDM32 with Dante and Reaper with no Problems.
I never could say what exactly the problem with Tracks was – so no help – but at least u are not alone… 😉2017/06/26 at 6:49 am #64009For example: i have Bass guitar and on one song i need an boost on 2-3khz that is not needed on other Songs.
So i just can hit “in” on that part and “out” if its over. Of course i can change the parameter itself but in and out would be easier…2017/06/23 at 1:35 pm #63996Of course all should be on by default.
This should only be an option. I found it very usefull to have.2017/06/08 at 12:08 pm #63760Of course. The Avid Consoles for example.
2017/05/19 at 7:31 am #63437Who really uses an 32bit Windows in 2017?
Where almost every Computer comes with almost 8GB or more RAM that only can be adressed by an 64bit OS.
So – i dont really see a problem with that.2017/05/19 at 7:29 am #63436I totally agree with pulenk – would be great to have an bigger IP Controller with Rotaries and so on.
But i dont know if A&H want to go that route.
We will see.2017/05/18 at 6:20 pm #63421I use this now as you are thinking about…
Agree – Encoders would be great – but that would be a pain in the a.. to programm various parameters for every encoder – and how do u want to switch them.
For that they would need to make an bigger IP Device with more buttons. Cause u need to program every button or encoder what they should control. U can make Scenes with different Layouts but then u would need more buttons to recall that scenes (layouts).
But would be cool to see.Oh – if i remember correct: Meters are shown in the LCD of each channel…
-
AuthorPosts