GLD 112 to SQ 6

Forums Forums SQ Forums SQ general discussions GLD 112 to SQ 6

This topic contains 7 replies, has 8 voices, and was last updated by Profile photo of Showtime Showtime 4 months ago.

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #67583
    Profile photo of Steveo
    Steveo
    Participant

    We currently run a GLD 112 at FOH and are looking to buy a SQ 6 to split off a broadcast mix. Is it possible to put an ACE card in the GLD 112 and pass audio to the SQ6 via the Slink port? I know it’s possible with Dante, but the cards aren’t available yet for the SQ6. Thanks for your help.

    #67803
    Profile photo of Nicola A&H
    Nicola A&H
    Keymaster

    Hi Steveo,
    No I’m afraid, support for ACE is not planned for SQ mixers.

    #67857
    Profile photo of lightingman117
    lightingman117
    Participant

    I thought S-Link port is a form of gigaACE in order to work with DLive series?

    #68253
    Profile photo of thegtrsr1
    thegtrsr1
    Participant

    So Dante isn’t available for SQ series mixers yet? This is exactly what I was planning on doing (using an SQ mixer for broadcast) but via Dante. I thought it took the same Dante card as the GLD mixer. Is that incorrect?

    #68274
    Profile photo of Alex A&H
    Alex A&H
    Keymaster

    Hi thegtrsr1,

    The SQ uses new technology compared with the GLD mixers, so unfortunately the cards are not cross compatible.

    #68277
    Profile photo of Wolfgang
    Wolfgang
    Participant

    “So Dante isn’t available for SQ series mixers yet?”

    on the product page there is a photo with a DANTE card in the desk.
    so that should work, shouldn’t it?

    #68288
    Profile photo of ddff_lv
    ddff_lv
    Participant

    Sure, Dante will work if SQ Dante is available.

    #68295
    Profile photo of Showtime
    Showtime
    Participant

    Last sound of the damte card for the sq is q1.

Viewing 8 posts - 1 through 8 (of 8 total)

You must be logged in to reply to this topic.