Forum Replies Created

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #96350
    Profile photo of vmf425
    vmf425
    Participant

    Final method map
    Inputs:
    Channel 1 Caster 1 audio
    Channel 2 Caster 2 Audio
    Channel 15/16 audio from gaming console

    Mixes:
    Mix 1 (delay 170):
    channel 1 + 2
    Mix 7/8 (delay 0):
    Channel 15/16

    MTX (To pc as main mix)
    MTX 1/2 (delay 0)
    Mix 1 + Mix 7/8

    Non mission critical:
    Mix 1 -> To PC as ‘caster audio only’ for discord / other

    This actually makes l/r main mix useless except for monitoring but it was the same in my previous method.

    I assume this is an improvement based on your replies! let me know your thoughts.

    #96349
    Profile photo of vmf425
    vmf425
    Participant

    Ah, I was liking doing everything via usb =( But what you are saying about using the MTX makes sense and perhaps is even easier?

    #96346
    Profile photo of vmf425
    vmf425
    Participant

    Gary,

    I actually DONT need those channels delayed (as I said in first post that stuff is coming in at perfect sync)
    That’s Why I chose this method

    #96344
    Profile photo of vmf425
    vmf425
    Participant

    OBS (ive tested since several version ago) does not remember this setting (it is supposed to)

    Method to recreate:
    Pick an audio input
    1)Set a delay (250ms + so you can feel the difference)
    2)Restart App
    3)Audio input says 250ms but is back to 0ms. (you have to set it to 250 again)

    Have reported this bug to them since several versions ago. If the only threat to this setup is misclicking then I still prefer it? Why are you guys adamant I should do something in software supported by hardware? I have expresed a few times I would prefer to do this in the hardware.

    The final mix is just L/R mix.

    In addition as I said above this would also force me to use v/sync filter in OBS which I do not want to use!

    #96338
    Profile photo of vmf425
    vmf425
    Participant

    Thanks for replies.

    Cha 1/2/3 are mixer channels

    The return is exactly what I typed. Channel 3 Return of Mix 1 via xlr -> 1/4 cable

    The other audio is from a gaming console.

    OBS allows for sync but you can only set ‘overall sync’ and it has bugs (your settings are not remembered when you restart the app.) We would also have to set v/sync for a game video feed.

    The camera is a digital camera. nothing goes into it, the video from it comes back to us but has built in 170ms delay as I’ve said. This does involve a ‘live stream’ but I don’t want to do this outside of the mixer as it clearly has the functionality I need (the current setup works!)

Viewing 5 posts - 1 through 5 (of 5 total)