[SteffenRParticipant]

quote:

---

Originally posted by foo727

well, i’m talking to myself, but i just found how to do that…
Thank you anyway !

---

but we can hear you…[]

SRV-AVB
R-72, iDR-16, xDR-16

[SteffenRParticipant]

If you have a scene containing some configurations you need in an actaul show you can copy only that special setting to the new show with the scene editor’s copy feature.

SRV-AVB
R-72, iDR-16, xDR-16

[SteffenRParticipant]

I would prefer a closer look into the added auto-modes since then. Maybe Rob can jump in here again…

SRV-AVB
R-72, iDR-16, xDR-16

[SteffenRParticipant]

quote:

---

Originally posted by Bricasti

Hi,
da du einen deutschen Namen führts hoff ich einen User aus Germany gefunden zu haben.Ich bekomme in 10 Tagen meine Ilive T112 inkl.iDRack 48,habe die deutsche Kuzanleitung vom deutschen Vertrieb erhalten,da ich aber im Digital Mixerbereich am Anfang bin,würde ich mich über eine Hilfe sehr freuen.

---

Ein deutsches Forum ist hier zu finden: https://www.iliveuser.de/index.php

For the english speaking… above is a link to a german user forum dedicated to the iLive system.

SRV-AVB
R-72, iDR-16, xDR-16

[SteffenRParticipant]

Nobody is listening to me…
My Surface is not T-112, or T-80 it’s R-72 and it has different buttons and it misses the local monitor volume poti.
That is the problem.

SRV-AVB
R-72, iDR-16, xDR-16

[SteffenRParticipant]

The wedge fader changes not the volume of the local monitor output. So I can’t see any chance to change the volume on that?

SRV-AVB
R-72, iDR-16, xDR-16

[SteffenRParticipant]

Nothing is shure in this case, stress level was to high on friday…
Will it test tomorrow

SRV-AVB
R-72, iDR-16, xDR-16

[SteffenRParticipant]

It’s not random in my case. I have always a red cross at firmware version if I connect my xDR to the system, but everything works flawless.

SRV-AVB
R-72, iDR-16, xDR-16

[SteffenRParticipant]

quote:

---

Originally posted by sraymond

P.S. There’s always the level knob on the amp powering your monitors. []

---

Genelec 8020 over 1,5m away… to difficult

I assigned the wedge fader but there was no Left/Right signal only PFL.
Should I activate the processing in the Wedges to have the main always present?

That is the only thing I hadn’t done so far.

SRV-AVB
R-72, iDR-16, xDR-16

[SteffenRParticipant]

Keyboard shortcuts for the possibility to rename channels without touching the console just using the external connected USB keyboard.
-next
-previous
-apply
would be cool

Maybe we can use a normal computer keyboard for scene editing as well, would save time I guess..,

SRV-AVB
R-72, iDR-16, xDR-16

[SteffenRParticipant]

Using the Wedge Outputs wasn’t an option in this special case, because there was no possibility for reconfiguring the desk to turn processing on wedge on.
Without processing the wedge out didn’t contain the Main signal as expected.

Maybe David, Carey or Rob can give me a hint…

SRV-AVB
R-72, iDR-16, xDR-16

[SteffenRParticipant]

The matrix was that what I used, but it would be better to have PFL as well on the same outputs. If I use a matrix this isn’t the case.

SRV-AVB
R-72, iDR-16, xDR-16

[SteffenRParticipant]

quote:

---

1. output trim on mains and auxiliarys – When CD level is at 0, fader is at 0 and mains are at 0 my amplifiers should not be limiting, and this has never been the case before. As every room we go into is different, often with a PA over-specced for the room. need to be able to adjust for this with an overall gain drop before leaving the digital world.

---

You can use matrix mixes here, as you can easily setup additional outputs or different output configurations without affecting your current show.

quote:

---

2. RTA redesign. This seems to have been built as a bit of an afterthought. The two greatest requirements needed here are the ability to adjust the gain of the response of the meters (without adjusting the gain on the channels you’re looking at) and also the ability to slow the response time. at present without slowing down it is near impossible to EQ a room adequately with Pink noise.

---

It is impossible anyway to EQ a room adequately with pink noise.

SRV-AVB
R-72, iDR-16, xDR-16

[SteffenRParticipant]

gain structure

0db istn’t 0db on all systems…

SRV-AVB
R-72, iDR-16, xDR-16

[SteffenRParticipant]

the delay is not fixed, it’s improved…
Still valid what is stored in the scene, but recall looks much faster.

SRV-AVB
R-72, iDR-16, xDR-16

[Author]

Posts