in MixPad it is possible to move the finger sidewards to change the level adjustments with the fader more accurate…
I can’t try this, have no touch for Director…

Dante would be able to split the signals with the network to multiple systems

Post Preamp is pre trim already

Settings > App

but you can configure nearly the whole system
it’s only the Custom Layers for the MixPad app and some smaller things what’s missing at the moment

I agree that it is very annoying to lose features,
but I guess there was a reason for doing this

gang the routing

Now if only they would add PAFL buttons to OneMix as I’ve been whining…

that would be silly… it will become a two mix app
one aux and one PAFL

I like the image too. It matches my tests of latency too.

Though I wish the Main/Group/Aux outputs were aligned :/
Still, have to burn two aux/groups to do parallel compression (with a fader). Though a control knob controlling the compressor processed/unprocessed would work.

It would be sweet to have it updated to have the Mix Ext In added to…

[Read more]

since 1.80 you can send a mix (IEM) to a PAFL bus and can configure them independent from each other,
separated PAFL settings

The new version of the app displays only a white screen on my 2 desktop computers (Win10 64bit) but it works as expected on my laptop…

@KeithJAH

very interesting picture

How about a second PAFL?

the tie lines are post A/D at the input and pre D/A at the output
if you have digital end points there should be no conversation needed

the only thing to keep in mind is there is a sample rate conversion if needed

it has the same problem as the different delays for left and right…

if you come to another computer system and load a programm and your programm changes all settings and deletes the user profiles even if you are not the owner of the computer?
this is not the way to go…

this should be no problem to a touring engineer…
you get the access you need to do your show
if not then talk to the owner of the system

[comment removed by moderator]

if everything is in the showfile it makes the user profiles useless… you will override them with a new show

you can select the stereo image options in the preamp

Stereo Image–This section is visible only when a stereo input channel is selected.Touch the mode to select from the following options:L/R = standard left/right.R/L = switched left/right.L-Pol/R =standard left/right with switched polarity on left.R-Pol/L =switched left/right with switched p…

[Read more]

disagree here… another point of failure…

to use two mono matrices should be the solution…

not in this system…
in Allen & Heath world a mute mutes everything

Why do you need this?