[RupertParticipant]

Yes, scenes work for that day/show/service etc.. however from week to week there are different singers, so being able to recall a specific mix to a bus would be beneficial.

[RupertParticipant]

Looking for the ability update the MEs from the console direct instead of having to do so to each unit.. For example setting up a group of drums on one unit then having to use a USB to export to the other units. Being able to configure all 16 buttons from the console, ME-U web interface or offline editor would be great.

From week to week, for various recordings, shows.. etc we require different configurations of groups within the ME units. Patching from the I\O screen is fine. The ability to configure the units from the console or web interface would speed up the workflow which is what I’m referring too.

[RupertParticipant]

@SteffenR yes I agree with @brad and @lightingman117 regarding the global routing pick off points.

[RupertParticipant]

Thats great thanks @wolfgang and @zistan.

[RupertParticipant]

@zistan so how would I go about doing this? If I have 5 groups (kick Gp, SnareGp, Toms Gp, Cymbals Gp,) and I want to bus them all to ONE Drums Gp how would I go about doing this using your method? Based on the others have posed its not possible unless I buss all these groups to a AUX then a matrix.

[RupertParticipant]

Looks as though I might be able to achieve this by sending all the groups to an AUX then to a Matrix.

[RupertParticipant]

The group to group = latency, makes sense.

The option that Wolfgang suggested would that cause any latency? How would I do this?

Would I route all my groups to the matrix first?

Also are there any plans to accommodate group to group in future updates?

[RupertParticipant]

Yes audio does pass through it’s just some inputs are not showing up for some odd reason. I patched 7 lines to the ME-1 out of the 7 only 4 are showing up. Regarding ME-U web interface where would I look to set the “use received name’?

[Author]

Posts