[RonParticipant]

Got on the desk this afternoon and with your comments was able to get the recording working. Many thanks to you both!

[RonParticipant]

Thanks for the replies. I am away from the desk today but will try this patching and check configuration tomorrow.

[RonParticipant]

I have tried both Tie Lines and Direct Outputs and tried so many different configurations of patching that I cannot remember exactly what I have done! Not a very good scientific way of going about it. Gain structure is pretty high. If I were to add the channels to the Mains it would blow them out. I do get confused by the Inputs and Outputs screens on the USB tab.

One scenario: On the Outputs/IP Direct Outputs tabs I click on 7 & 8 to USB channel 1 & 2. On the Inputs/Input Channels tab I connect 7 & 8 to input sockets 1 & 2. I know this is one of the patches I tried.

There is something I am not understanding about this SQ patching and it really has me stymied!

PS: I have tried recording to USB stick, From USB B to Computer, from Local Outputs A and B to computer. Nothing…

[RonParticipant]

I would expect that a Hard Reset would not remove an existing password as that would defeat the purpose of having a password to begin with but I would like it in writing from the manufacturer in order to clear up a situation at school. Thanks for your help. Ron

[RonParticipant]

Does a Hard Reset remove an existing password? I just need a Yes or No.

[RonParticipant]

Someone placed a password on our SQ-6 in the auditorium – no now one can get into it. Does a hard reset allow you to open the desk? I already have a backup thumb drive so I’m not concerned about losing any files. I just want to get into the desk! We have a choir concert Wednesday evening.

[Author]

Posts