Forum Replies Created
-
AuthorPosts
-
2012/04/19 at 4:39 pm #30394
quote:
Originally posted by Big Azzquote:
Originally posted by RaySquote:
Originally posted by StealthHi LifeLike
Scene crossfades have not been implemented in iLive firmware. We are aware that this has been requested by some customers in the field and is on the ver long list of requested features. unfortunately this has not been a feature that is high up on the request list so has been implemented.
What are the most important features within the system that you need the ability to crossfade?
Regards
Sam A&HI must admit to being more than a little sadden at this response……scene crossfades have been implemented on nearly every digital consoles since the advent of the venerable 02R, even the analog midas XL4 had 0 to 10 seconds scene crossfades, 20 yrs ago!!!!! Aside from the much needed multiband compressor and the ability to mute/unmute individual EQ bands I fail to see what other feature could be more necessary that the scene x fade.
It would seem that A&H, with the introduction of the gld, have clearly set their goals to compete with the likes of the m7cl or ls9 crowd leaving the higher end users with little to celebrate……While I enjoy mixing on my iLive system, I find myself jealous of competitors’ (Digico ) rapidly increasing feature sets and scene implementation…….Unlike other posters I do not care for the need to mix with an iphone, ipad or other gadget, and while I am well aware of the iLive’s cross market appeal and A&H ‘s need to please the lower end user as well as the seasoned pros, I need pro gear, and that, includes scene fades…..
Faders
FX levels
Pans
and I would add EQ band gainsRayS
All the way couldn’t agree more
IDR 64, T112, Dante, iPad, iMac Reaper, Mac Mini Abelton Live
Me too! Couldn’t agree more…
More Stage Services
The Hague – Holland
iLive 144 – R-72 – iDR10 – iDR162011/10/24 at 12:38 pm #29873Hi Sam,
Thanks for that. I do understand the theory.
In practice however, the output routing, done via the editor does work and with the right ethersound to ace patch I got all surface IO to work except for the surface talk back. This was just a one off and if we were using this config regularly I would move the ace to port A.regards,
Marcquote:
Originally posted by StealthHi Marc
The reason you cannot see the surface tab on your R72 is that you do not have a valid surface link for the system.
With iLive PortA is designed primarily as a mixrack to surface audio link, portB is designed for system expansion. If you do not have a valid surface link then the system will hide the option to adjust your surface output settings as they would not work anyway.
To fix this fit your ACE module to PortA of the iDR10 and Ethersound to PortB. Then connect ACE portA on the iDR10 to the ACE port on the R72.
Note: make sure you also fit the ‘bridge control network’ port on the ACE module in PortA to a free network port on the CPU rack. You should then be able to access the outputs page on the R72.Regards
Sam A&HMore Stage Services
The Hague – Holland
iLive 144 – R-72 – iDR10 – iDR162010/10/24 at 6:04 pm #26657I would like the Editor to prompt you to save a show if it has been modified (like nearly every other program on the planet) to avoid the dozy gits amongst us just clicking it shut and losing a load of work!
cheers,
MarcMore Stage Services
The Hague – Holland
iLive 144 – R-72 – iDR10 – iDR162010/09/13 at 12:55 pm #26371You can route inputs to matrices on Digico desks… so I agree with Paul.
regards,
MarcMore Stage Services
The Hague – Holland
iLive 144 – R-72 – iDR10 – iDR162010/05/08 at 8:36 am #25561Just got our R-72. Very Nice!
One immediate frustration for a user used to our 144 surface is the GEQ to fader function with so few faders. It would be a great improvement if the fader scope could be selected by selecting the centre band on the touch screen.
cheers,
Marc2009/12/20 at 4:36 pm #25001Might well be the answer to DiGico’s Vacuum tube pre-amps!
Cheers,
Marc2009/06/01 at 2:39 pm #24342I would like to be able to save strip layers separately in the scenes. This seems more logical to me than just banks – e.g. in a festival situation – 1 band per layer.
Regards,
Marc2009/03/30 at 12:43 pm #24134It would be useful to be able to assign the wedge and IEM output levels to a PL6 fader.
Regards,
Marc2009/03/04 at 4:27 pm #24224quote:
Originally posted by WolfgangCompressor Sidechain function:
“Self Key´d” is not enough, give us more flexibility please:
Sidechain
– Self, pre or post EQ
– from any another Channel or Mix(!)
(I need “ducking” for a show[8D])I agree.
(Congrats on 1.42 BTW)
Unless I’m missing something why is the “Self Key´d” a pulldown if you can’t select anything?
Regards,
Marc2009/01/21 at 4:30 pm #24164Here’s another vote for flashing MUTE lights!
Regards,
Marc -
AuthorPosts
