Forum Replies Created

Viewing 13 posts - 16 through 28 (of 28 total)
  • Author
    Posts
  • #41427
    Profile photo of JLD
    JLD
    Participant

    Dont have Qu but it works on GLD. Hopefulli it works on Qu as well.

    “Scene recall Go” with auto increment. May be the solution on your request.
    Page 51 in the manual.

    #39951
    Profile photo of JLD
    JLD
    Participant

    Make three different sceens.
    One normal
    One with all channels muted and unassigned from the LR
    One unmuted an unassigned.

    And filter out all other parameters to be safe.
    If you have softkeys available it can be done with one button for each sceen.

    (hope it orks for Qu, it workks on the GLD)

    #39184
    Profile photo of JLD
    JLD
    Participant

    Under GLD80 mixer images, a picture shows a speaker matrix.
    Is it a mistake or a tease?

    #35524
    Profile photo of JLD
    JLD
    Participant

    Yes I now the possability to drag the finger away.
    The problem is that i often needs to adjust 2 or 3 channels at the same time.

    #33835
    Profile photo of JLD
    JLD
    Participant

    Why not connect the wedge amp to the ME-1?

    #32804
    Profile photo of JLD
    JLD
    Participant

    On its way and itt will be for free. [:)]

    #32549
    Profile photo of JLD
    JLD
    Participant

    A way to route Left OR Right to a mono matrix.

    #31695
    Profile photo of JLD
    JLD
    Participant

    Yes, no problem. Just connect it to the expander port on the mixer.

    #31638
    Profile photo of JLD
    JLD
    Participant

    Any update on the manual in the near future?
    Or will there be a software update before which will be included in the manual as well?

    Regards

    #30672
    Profile photo of JLD
    JLD
    Participant

    Carey
    Thanks for the firmware update. The update is installed and it solved half of the problem as mentioned.
    What we can not find in the manual or figure out is the possability to only route left signal to a mono matrix and not the right.
    As it is now there will be a sum signal from left and rigt to a mono matrix and we only want to have left OR right.
    Please direct us in how to manage this.

    #30652
    Profile photo of JLD
    JLD
    Participant

    Thanks for the update; it solved half of problem with the matrix system.
    Is there any information regarding the possibility to only assign either left or right to a mono matrix?

    #30531
    Profile photo of JLD
    JLD
    Participant

    If its not a bug someone needs to explain why i have problems with the matrix system.
    I need to adress only the right channel to one matrix together with other signals and only the left signal to one. Is it possible to adress only left or right to a mono matrix.
    When trying to adress to a Stereo matrix only the left chanel will have signal, the right one is silent.

    Any information on this?

    #30530
    Profile photo of JLD
    JLD
    Participant

    I am convinced that A & H know and have a plan for future upgrades, features to be implement in a product like GLD. Meanwhile, I hope that we, as users may have some impact on the priority for the functions to be implemented.
    After all, we are the customer, and a better market understanding, than to listen to existing customers is hard to get for free.
    What we do not know is what limits is set by market reasons, not to compete with the ilive system. On the other hand, if GLD should be a product that competes with other brands, it must have a minimum of features (Convinced that A&H has looked at the LS9 and Sicompact).
    I can agree that the next scene button is one of the features needed to compete with the GLD system, this has been standard on other brands for long time.
    Another feature these days is a remote control software and in many situations an Iphone app or similar.

    The problem with written statements in a forum like this is to know in what tone the author wants to express himself. I hope that A & H staff is reviewing this and I am sure they will take business decisions when they develop the product further.
    .

Viewing 13 posts - 16 through 28 (of 28 total)