[DarrylParticipant]

Thanks Brian and D3F.
It seems that iOS is quite strict with background apps – more so than Android.
There are various developer forum posts regarding similar issues with iOS background/suspend, but alas it seems nothing that an end-user can do about it.
The band members are now talking about needing two iPads – one dedicated to OneMix so that it doesn’t disconnect! 🙁

[DarrylParticipant]

Thanks for the explanation @msteel. That makes sense.
Following another test I now see that it is actually working that way.
Much appreciated!

[DarrylParticipant]

Same problem here.

e.g. Where input channels in the Demo are stereo pairs (e.g. 7 and 8), _and_ they are mono channels in the MixRack config, then loading the Demo reconfigures channels 7 and 8 as stereo in OneMix. When subsequently reconnecting to the MixRack there are two strips for channel 7 in OneMix – and no control over channel 8. Have to log back in to OneMix as Admin and re-establish the correct OneMix config.

Otherwise have to tell the talent to _never_ go into Demo mode — and they inevitably want to do that as they become familiar with OneMix.

Currently running Firmware 1.87, with OneMix 1.9 in 1.8 compatibility mode.
Is this fixed in Firmware 1.94, or will it be an ongoing issue?

Thanks.

[DarrylParticipant]

Any update from A&H as to when/whether dLive will support RF integration with Shure’s SLXD?

Particularly now that Shure has added full support for SLXD to the Wireless Workbench.

Thanks.

[Author]

Posts