Forum Replies Created

Viewing 15 posts - 1 through 15 (of 60 total)
  • Author
    Posts
  • #35106
    Profile photo of bigbean
    bigbean
    Participant

    I have the GLD-80 on a sequencer. A furman key operated one actually. I could and probably will set all of the sequence times so that the system doesn’t crack on turn on when the AR units sync after 40 seconds or so, But it’s really annoying since everything was OK in firmware 1.01 and got un OK later.

    I have bunches of digital mixer installations large and small, Some of them are 10 years old and are being upgraded.

    I don’t read any other message boards. I read this one, cause after one year it’s a work in progress.

    Why aren’t the outputs of all units muted until sync is complete then checked against the systems recalled state mute list before unmuting?

    Why do I have to ask that question on the message board?

    The surest way to windup with nothing is to wait for everything. On the other hand, the 2nd mouse always gets the cheese.

    #34786
    Profile photo of bigbean
    bigbean
    Participant

    Editor next week.
    I’m stoked.

    The surest way to windup with nothing is to wait for everything. On the other hand, the 2nd mouse always gets the cheese.

    #34755
    Profile photo of bigbean
    bigbean
    Participant

    Will the webinar have a link for viewing after the fact?

    The surest way to windup with nothing is to wait for everything. On the other hand, the 2nd mouse always gets the cheese.

    #34747
    Profile photo of bigbean
    bigbean
    Participant

    Is it June yet?[:D]
    I’m looking forward to it

    The surest way to windup with nothing is to wait for everything. On the other hand, the 2nd mouse always gets the cheese.

    #34586
    Profile photo of bigbean
    bigbean
    Participant

    quote:


    Originally posted by John S
    The crash has been pretty much documented and solved as much as any

    Isn’t the heading of this post unnecessarily dramatic and alarmist?

    John Stefanick
    https://www.RentWirelessMicrophones.com


    500 people in a quiet room, staring at you expectantly, while you poke helplessly at a non functional object could elicit a dramatic post.

    Ever been there?

    A couple of things that are true:

    The people at A&H pay some attention to this board

    The don’t edit it (very admirable behavior)

    They seem to be working hard on extending the reach and reliability
    of this product

    Us early adopters have dealt with a bumpy roll out

    The surest way to windup with nothing is to wait for everything. On the other hand, the 2nd mouse always gets the cheese.

    #34501
    Profile photo of bigbean
    bigbean
    Participant

    It seems to me that many issues issues of digital weirdness are somehow related to usb drive handling by these units.

    Boil it down – Great sounding, easy to use, flexible, good value

    but

    More software work needs to be done on this system.

    The surest way to windup with nothing is to wait for everything. On the other hand, the 2nd mouse always gets the cheese.

    #34423
    Profile photo of bigbean
    bigbean
    Participant

    Willy-

    No freezes here.

    I’m wondering about power,cabling and I/O box issues for you.

    I hope you can solve this in a provable way so that it’s behind you.

    The surest way to windup with nothing is to wait for everything. On the other hand, the 2nd mouse always gets the cheese.

    #34468
    Profile photo of bigbean
    bigbean
    Participant

    How soon will the Editor run in Editor mode, as opposed to say, brochure mode?

    The surest way to windup with nothing is to wait for everything. On the other hand, the 2nd mouse always gets the cheese.

    #34400
    Profile photo of bigbean
    bigbean
    Participant

    Have had mostly drops in Aviom IEMs but also less frequently on the mains. Roughly one incidence per 6 hours of use. I haven’t updated to 1.2 yet. Our FOH team are fader and mute folks who memorize a preset for each song during rehearsal as a starting point during performance.

    The surest way to windup with nothing is to wait for everything. On the other hand, the 2nd mouse always gets the cheese.

    #34282
    Profile photo of bigbean
    bigbean
    Participant

    I’m hanging with Willy.
    Chillin till 1.2+

    The surest way to windup with nothing is to wait for everything. On the other hand, the 2nd mouse always gets the cheese.

    #34257
    Profile photo of bigbean
    bigbean
    Participant

    This is a good idea.

    Maybe they could use a fast flash that would time out on the member channels or an alternating select/mix led fast flash.

    (It would be a nice effect during the Christmas season and children would dig it. This is probably why I like it[:D])

    But seriously, it’s a good idea.

    The surest way to windup with nothing is to wait for everything. On the other hand, the 2nd mouse always gets the cheese.

    #34243
    Profile photo of bigbean
    bigbean
    Participant

    I agree that since you can’t roll back the Ipad update it’s best to have the firmware first but there should have been a big hairy asterisk on the web page before you got to the download. It could be removed after things synchronized. This could be a big time waster and blood pressure raiser for some. This kind of thing causes you to lose cred with your peeps for no good reason.

    The surest way to windup with nothing is to wait for everything. On the other hand, the 2nd mouse always gets the cheese. The first mouse gets the unhappy surprise.

    #34173
    Profile photo of bigbean
    bigbean
    Participant

    I’ve encountered volume weirdness as well.

    This morning during plugin/tuning the level (direct from pedal board) in my avioms (direct out to the avioms) was great until they recalled the first song preset, the level (in my ears) then dropped about 9 db. No one changed the the gain settings and the input gain is the same on all the presets. Later (different preset) the
    ac guitar dropped. The guys who mix FOH don’t change anything but fader levels. I didn’t have the ability to sus this out during the service and there are a lot of variables but I think this could be a mixer issue.

    This kind of thing has happened before but not often. If I can recreate this in a measurable way I’ll post about it.

    The surest way to windup with nothing is to wait for everything. On the other hand, the 2nd mouse always gets the cheese.

    #34030
    Profile photo of bigbean
    bigbean
    Participant

    it ends with a 3.

    The surest way to windup with nothing is to wait for everything. On the other hand, the 2nd mouse always gets the cheese.

    #34028
    Profile photo of bigbean
    bigbean
    Participant

    In anticipation of offline editing, it will be cool to swap stuff like this and check it out in “sim”.

    Had June intro of offline editing confirmed by a A&H person (shh…. it’s our secret)

    Other cool things for this part of the A&H product line coming, as well.
    [8D]

    The surest way to windup with nothing is to wait for everything. On the other hand, the 2nd mouse always gets the cheese.

Viewing 15 posts - 1 through 15 (of 60 total)