[waveproParticipant]

Another question on Director. Can you make a 2 track recording to USB with dLive Director?

[waveproParticipant]

I built a surface-less system using 2 dell 24″ screens,PC and a DM0 with a Dante card. I have the DM0 network port feeding the secondary Dante port and the primary port going to a switch at FOH for the computer. Also I’m using a Shure ANI 4 in for local inputs such as music and TB. My issue is I can’t get the IP addresses to play nice with each device, Director, Dante card and the Dante ANI. Tried changing the mix rack to DHCP like the Dante units but Director doesn’t want to connect. Not a big network guy, I get that I have to be on the same subnet but not sure how to configure the Dante devices, the Mix rack and the computer. Any help would be appreciated.

[waveproParticipant]

AndyH is correct. I did this and all is good

[waveproParticipant]

As far as the boot scene, it works fine for me but, as Carafon said there is a long pause, I make it out to be about 4-5 sec. It will boot up in the last state the system was at, what ever the scene was, and after the lag time it loads to the start up scene that was selected.
Although thankful that this was put back in to v1.9, it would be nice if it worked the same way it originally did.
Thanks again for all the upgrades, A&H is by far the best bang for the buck!

[Author]

Posts