[torParticipant]

Sorry, but you’re an idiot for not checking out the product you are purchasing. Doing big and complex monitoring setups is not the intention or purpose of the IP controllers. For that you are much much better of with the ME boxes. You should have talked to the sales rep about your specific needs.

[torParticipant]

The dLive system should not be developed with uneducated volunteers as the user base. It is a pro desk, for pro users, and of course the Home should not do anything but take you to the home screen.

[torParticipant]

Wow! Seriously awesome!

[torParticipant]

Absolutely nothing should happen to the rotaries when pressing the home button. They should not change function if you ask me 🙂

[torParticipant]

A&H, you have plenty of surfaces to suit all need. Please don’t use R&D resources for stuff like this.

[torParticipant]

You are aware that 128 channels of I/O is a LOT, and all your connections will take up resources, it will put a lot of stress on both connections and computer. With so much going on, you need to raise the Network Latency in Multirack Soundgrid significantly higher than the standard 0,8ms – and have very high buffersize in Tracks Live.

The Waves V3 card has run absolutely perfectly for me.

[torParticipant]

The feature is there, you just need to do it properly and not blame the console. You can just make a communication AUX, and feed it to the external input. As everyone else does on every other console.

[torParticipant]

You must have patch conflicts, as Steffen points out.

[torParticipant]

External input to the PAFL bus works just fine, and is permanent.

[torParticipant]

Absolute must. Trust me, it has been mentioned countless times. @AH help us out here please!!!

[torParticipant]

An asymmetrical shelving mode with Q control on the channel EQ would be a greatly welcome, and better solution, instead of doing it as an insert/fx rack. This is possible on most of the new consoles out there, Yamaha, Midas, Digico – it really would make a lot os sense!

[torParticipant]

You will have to use 2 identical network switches, supporting ethernet trunking. 1 switch in each end (Mixrack and Director, set up port trunking on both of them. You can set it up for 2, 3, 4 lines or how many you like – this is usually used to eliminate the 1gbps limit, but will also work as a redundant connection in these types of setups 🙂

[torParticipant]

plenty of times without problems.

[torParticipant]

He will probably be looking for a Gated Reverb.

[torParticipant]

Thanx for that absolutely pointless and ridiculous post.

[Author]

Posts