[StratParticipant]

Wow you are my hero of the day!
Your guess was right. It was the direct input signal. I turned it off and the problem with the volume was solved.
I’m so thankful that this forum exists and that you helped me!

[StratParticipant]

I finally got my qu24. The qu16 was not available, so I took the qu24 after all.
Unfortunately I have a problem with the setup with the loopstation:

I put the guitar on channel 1 and send the signal to group 1+2 (LR unassigned). Group 1+2 goes to the loopstation. The loopstation goes into channel 24. And channel 24 to LR.
The problem is that the guitar is louder when I play it live. And when I record it with the Loopstation and only let the record play, it’s quieter.
So if i only play guitar i have 0db on LR. if i record it with the loopstation and then play it back and no longer play live i have -3db.
as if channel 1 and channel 24 are audible together when recording and only channel 24 when playing the recorded track. But how is it possible if channel 1 is assigned to the group that feeds channel 24?
And if I turn up the loopstation, the live guitar gets louder too.
So how do I manage that the live signal from channel 1 has the same volume as the recorded signal from channel 24?

I hope that’s not to complex…

[StratParticipant]

Thank you so much for your answers and advices!
I’m so glad that the qu16 should work with my setup.
And a special thanks to Lexinton for the step-by-step instructions. I am a complete newbie and that helps a lot.
I just placed my order and I can’t wait to try this out.

[Author]

Posts