Forum Replies Created

Viewing 15 posts - 1 through 15 (of 206 total)
  • Author
    Posts
  • #106572
    Profile photo of Stonepiano
    Stonepiano
    Participant

    Thanks, you understand, what I´m dealing with here. It will go like this: ” we are on a lightweight- tour.you want multichannel digital split- you provide the necessary interfacing. Our FOH- Guy is fine with DigiCo, or Midas (although He don´t like Midas). Soundcraft OK too. I mean, The Swedish Radio…? Rental- deal for the room contains the KIVA- system -which is nice- .some lighting, and one house technician. No console. if I were The Tour Manager, I would rent the whole Shebang… cost- effective, He is

    #106561
    Profile photo of Stonepiano
    Stonepiano
    Participant

    If the production is not willing to get that Dante-card, I´m certainly not going to pay for it from my own pocket. I´m a hired hand, the console is not mine. “Dealing with operational imitations” is exactly what I´m trying to do here.

    #106553
    Profile photo of Stonepiano
    Stonepiano
    Participant

    – if you think Hugh was “polite” in his reply, so be it. Here in Finland we have a saying that translates as something like: “the forest replies, as it was addressed”.

    Never Mind, I´ll just ask them to bring a Mac with ProTools, and feed the stuff from USB B.

    #106549
    Profile photo of Stonepiano
    Stonepiano
    Participant

    I´m driving monitors from FOH. The radio-guys excpect to see digital. I´m sure they could bring a multichannel interface, and accept my GX- analog outputs. It´s another conversion, but what the heck- they are not recording an album, but a one-off TV show.

    Cheers,

    T.K.

    #106548
    Profile photo of Stonepiano
    Stonepiano
    Participant

    Hi Mike,

    – so far I have no info, trying to get them to reply to my enquiries.they wished for Dante, that much I know. If it´s going to be live on the air, I´m going to give them a couple of stereo- stems, I have a few auxes unused. We are travelling lite, and I hope The Swedish Radio can accomodate…

    T.K.

    #106546
    Profile photo of Stonepiano
    Stonepiano
    Participant

    Well,

    I told yuo guys, that we don´t have any option cards installed, nor will there be any for this tour. I was reading an oudated reference- manual, so sorry.
    *Comment removed*
    I´m fine, if I can just hand the tracks for the videoteam for post. a whole different ballgame, if it´s a live broadcast…

    Again, so sorry I wasted your precious time. Most of my time is spent mixing the band…

    P.S. a “participant” is NOT a moderator, perhaps Hugh does not understand the difference?

    #106544
    Profile photo of Stonepiano
    Stonepiano
    Participant

    OK, fine, thanks… missed that. But I´m still trying to figure out a way to send all my inputs to a secondary destination.

    #106542
    Profile photo of Stonepiano
    Stonepiano
    Participant

    No, I can´t. SQ- drive records 16 inputs + L/R. I need to get about 30 individual channels out of the desk, digitally. I´m talking possibilities to use the USB B- port, or AES…

    Cheers,

    T.K.

    #105530
    Profile photo of Stonepiano
    Stonepiano
    Participant

    I have it downloaded on my Lenovo tablet, but haven´t tested yet. I had some version of it before, but it couldn´t even connect to my router, so I´m a little sceptical…

    #105483
    Profile photo of Stonepiano
    Stonepiano
    Participant

    @ JimmyB: Air or no Air has nothing to do with this. Thanks Giga, I had the Mini2 but it died. Just checking that the newer versions of the MixPad don´t mind.

    T.K.

    #88104
    Profile photo of Stonepiano
    Stonepiano
    Participant

    Hi Keith,

    – and thanks for your reply. I’ ll be back at the desk tomorrow, I’ ll send you a videoclip,along with a showfile. Pretty sure I’ m doing sumptin’ wrong here, but most certainly it is not the cabling, something is happening inside the SQ…

    Best Regards,

    T.K.

    #88080
    Profile photo of Stonepiano
    Stonepiano
    Participant

    One more: when I adjust the gain on the matrix, it crackles.

    #88053
    Profile photo of Stonepiano
    Stonepiano
    Participant

    Yes, the noise is there, even with the rest of the chain muted. Returns sound OK on PFL, as do the AUX- masters, it´s only the matrix-send. The funny thing is, that I have matrix3 sourced from L/R for my local wedge, and it´s clean.

    #88051
    Profile photo of Stonepiano
    Stonepiano
    Participant

    Hi Alex,

    It´s not the signal generator, the noise is not uniform. And there´s no external patch.

    #88041
    Profile photo of Stonepiano
    Stonepiano
    Participant

    I might add, that the returns and auxes are completely noise- free, it´s just the matrix-send that hisses…

Viewing 15 posts - 1 through 15 (of 206 total)