[selfmadeParticipant]

today i could change the name of the device, thanks AndyH!
the problem stayed, that the pc didn’t appeared at the controller software.

then i tried to update the firmware of the dantecard.
that seemed to get wrong
right now the led’s of the network won’t light anymore and i couldn’t connect
to the pc anymore.

i submitted a support ticket!

greetings from hamburg

IDR 48 / T112 / Laptop / Tablet-PC / Dantecard

[selfmadeParticipant]

i´ll check the options soon.
i´ll keep you informed!

thank´s, timo

greetings from hamburg

IDR 48 / T112 / Laptop / Tablet-PC / Dantecard

[selfmadeParticipant]

hi andy!

– dvs is activated

– if tried dhcp and static ip, both working. it communicate with the dante card.
i could choose the card at the controller and get a ip shown at the dvs! it seems
the communication was working. but i could’nt change the name of the dante-device

– the laptop has gigabit network ot’s a lenovo t61

greeting’s timo

greetings from hamburg

IDR 48 / T112 / Laptop / Tablet-PC / Dantecard

[selfmadeParticipant]

i would rout the mixes through the matrix.
so that you have for every IE-mix a several matrix.
you can feed the matrix with the LR signal plus an independ AUX!

so you can deliver the LR-signal with a individual signal from an AUX!

greetings from hamburg

IDR 48 / T112 / Laptop

[selfmadeParticipant]

same problem here!

no problem with the router, if i connect it wired with an editor running on a lpatop.
the connecting is just lose, if the mixrack is connected wireless with an ipad.

greetings from hamburg

IDR 48 / T112 / Laptop

[selfmadeParticipant]

thx

greetings from hamburg

IDR 48 / T112 / Laptop

[selfmadeParticipant]

@wolfgang
that´s the point….you gonna miss the direct signal from backline!

greetings from hamburg

IDR 48 / T112 / Laptop

[selfmadeParticipant]

not yet…the delivering time is about 2-5 days…
should they sell something, that´s already not available?

greetings from hamburg

IDR 48 / T112 / Laptop

[selfmadeParticipant]

thanks for your explain of the multicast option, i feel informed better.

my experience with the wireless remoting brought me to the desktop remote of windows.
i connect a stationary laptop with a wireless router together with the mixrack (wired!)
with my tablet i use the desktop remote to remoting the stationary laptop.
that offers control instead of just the remoting.
i can run diffrent programs i need, like itunes, or wavelab…

greetings from hamburg

IDR 48 / T112 / Laptop

[selfmadeParticipant]

hi,

how to use?
normaly take them as a special output, like recording the sum or feed a delayline/nearfill…whatever

greetings from hamburg

[selfmadeParticipant]

quote:

---

Originally posted by martijn

Me i personally think pop groups are higly over rated.

i don’t think you want to have your layout changing all the time.
if you make a good layout everything is were you need it.

---

that´s my experience too!

greetings from hamburg

[selfmadeParticipant]

so far, i haven´t any problems with that behaviour…

greetings from hamburg

[selfmadeParticipant]

come on guys!
i tried the automation via midi…that´s far of comfortable!
in my mind, there´s no automation on usefull parameters, like eq or compression…

greetings from hamburg

[selfmadeParticipant]

short question…how do you hear the main mix?
via headphone or PA?

bcause it´s possible that the listening point is pre fader/pre limiter at the output mixes

greetings from hamburg

[selfmadeParticipant]

BIG minus = no automation!

greetings from hamburg

[Author]

Posts