Forum Replies Created
-
AuthorPosts
-
2010/12/10 at 8:55 am #26887
the only way to use them is via the analog inputs/outputs.
greetings from hamburg
2010/12/09 at 12:20 pm #26883please keep us up to date about the result.
greetings from hamburg
2010/11/27 at 2:45 pm #26837why not use simple tablet pc via desktop-remote?
the problem you´ll get with an ipad is, that you must be carefull with the touch!
you may change parameter, if you touch the ipad accidental!
that´s what not gonna happen, if you use an tablet pc.greetings from hamburg
2010/11/19 at 11:52 am #26798cons?
it´s not freegreetings from hamburg
2010/11/18 at 11:40 am #26789you need a idr-rack to have access to your idr48
greetings from hamburg
2010/11/16 at 2:19 pm #26785that´s completely over the top…
an analoge-board has it´s own weak-points, like powersupply and outboard equipment and defect´s caused by old age!in the digital world you´ve to accept that the systems may be instable. my experience is that yamaha products are not more reliable than other digital boards.
so, the general way back to analoge boards, in my mind, is defenite the wrong way!
greetings from hamburg
2010/11/15 at 4:14 pm #26779why safe money on the wrong side?
the led-lights from a&h are dimmable! that´s a great feature you won´t have with usb-llghts.greetings from hamburg
2010/11/11 at 1:05 pm #26755does everything have the same firmware version?
greetings from hamburg
2010/10/12 at 5:06 pm #26617another post from guyharris:
“It would be good to see which other users are online at any given time. I don’t know if there is an interface to the ‘server / router’ function through HTML, but I certainly haven’t found it (and I’ve tried.)
G
greetings from hamburg
2010/10/12 at 11:40 am #26616you can also use a usual strip as a FX-return to have full processing.
just patch it at the preamp…greetings from hamburg
2010/08/31 at 6:58 pm #26255select the inputchannel, under preamp is the 48v option…
greetings from hamburg
2010/08/25 at 2:19 pm #26204quote:
Originally posted by john@eartsincMost of these topics have already been answered by 1.7. The HPF and LPF on Mains is an option under your Mixer Configuration. As is phase. On Editor you can use the Soft Key Simulation under your “Tools” menu.
John
eartsincthat´s not right!
there is no phase-option at the mixer configuration!it´s possible to realise the lpf and hpf on output if you select the 20-20khz free filter option on the outputs.
greetings from hamburg
2010/08/17 at 2:31 pm #26135hi,
your first question:
if you press the mix-button at an input channel, you can see the active buses (exclusiv DCA) in the mix channels window.your second(or first) question:
yes, it´s possible to store separate channels with every option, like gain, pan…just have a look at the “edit” at the scene menue.greetings from hamburg
2010/08/15 at 10:26 am #26123i think you just have to give every unit a unique ip-adress.
there should be no problem with a different ip-adress to connect to your R72.greetings from hamburg
2010/08/13 at 10:21 am #26117you can leave the mtx faders on 0db, when you feed the mtx!
you simply set the level-mix to the mtx that you want.
you defenitly don´t need an output trim!greetings from hamburg
-
AuthorPosts