Forum Replies Created
-
AuthorPosts
-
2013/03/04 at 2:31 pm #33318
That is the new configuration. It is just a pain having to re-run the. Cat5 from the mix location to the opposite side of the stage. We have to pull the unusable stage box from the video rack and put the 84 in it’s place. Correct information at the design phase would have changed the layout and a lot of labor.
Thanks for the feedback!
Just to clarify………We are very pleased with the system.
GLD80.
Aviom monitor system
2412 and 2- 88 expanders
Nexo vertical array 3- geo s1210 1- 1230 per side
4 Nexo s-15 subs mounted under stage apron
Nxamp 4×4. Power amp.quote:
Originally posted by seagullquote:
Originally posted by gilparenteQuite honestly, even in installations, i like to leave all my inputs on one side and run a sub snake to the other. That way, any extra patching as well as trouble shooting is done on only one side of the stage.
Just my2cents
Gil Parente
Design & Integration
Entertainment Arts, Inc.
iLive 176, T112
iDR48 , iDR16, iDR10
Multiple iPads
Dante
Etc..2013/03/04 at 2:14 pm #33317quote:
Originally posted by gilparenteQuite honestly, even in installations, i like to leave all my inputs on one side and run a sub snake to the other. That way, any extra patching as well as trouble shooting is done on only one side of the stage.
Just my2cents
Gil Parente
Design & Integration
Entertainment Arts, Inc.
iLive 176, T112
iDR48 , iDR16, iDR10
Multiple iPads
Dante
Etc..2013/03/01 at 4:23 pm #33276The curious thing is the sends work on the second stage box. It does not recognize the inputs.
It is a permanent installation and we ran everything including the power amp location based on using two. Now we are scrambling under the stage and elsewhere to relocate the inputs and sends.
I questioned our salesman several times leading up to the install why I could find no diagrams or backup on this configuration. He assured me that it was possible only to come out after it was set up that he must have been misinformed.Thanks for the suggestion on a possible solution.
2013/02/28 at 9:06 pm #33262Thanks,
I understand the initial. Setup. We are currently using the complete system The reason I asked is we were told when we purchased the system that we would be able to use 2 24 channel stage boxes in tandem. Nice thought for a permanent installation -
AuthorPosts