[outformatorParticipant]

Thanks! I agree this looks like reasonable solution. Already two shows with no problem having memory stick iserted. Will let you know if I face the same problem again.
Anyways, let me explain my suspicion. What we use for dSnake connection is CAT5 cable foiled but not shielded as it is reccomended. So all the dSnake traffick might stay more susceptible to different interferrences. Does anybody use recommended cables with appropriate lenght and expereience the same prolems?
Thank you all

quote:

---

Originally posted by drb93el

Hi Folks

Upgrading to V1.22 seems to have done the trick. We ran a 2 hour show yesterday with out an error/freezing from the GLD80.

However. After upgrading we did get a few errors and auto-reboots, in the USBManager.cpp file. Inserting a memory stick in the USB seemed to solve that. We have a matrix mix sent to the USB recorder, Im guessing there’s still an issue with checking if a memory stick is present. Will investigate further.

Hope everyone’s GLD80 working ok with v 1.22.

All the best

Derek Baker
GLD80 / AR2412 / 2 X AR84

---

[outformatorParticipant]

i did not use flash drive at all when freezes happened. a week ago i have contacted A&H tech support. They told me the problem will hopefully be solved with new software expected in February:). Hope so. thank you

[outformatorParticipant]

Got the same problem with my GLD80 (it stays frozen for up to 3 min, than turns back to its working condition or sometimes need to be restarted).
I was thinking over one funny reason for this trouble — I am just too fast to push different knobs, all those that i need and those that i don’t for sure. So the system may stay to much loaded with all my demands.
Anyways, I will try to contact A&H and send them the log file. Has anybody already received any answers from tech service staff?
thank you

[Author]

Posts