Forum Replies Created
-
AuthorPosts
-
2021/09/07 at 4:56 pm #103318
So is it possible to customize the outputs that go to the ME-500? Or is the auto assignment feature permanent?
2021/04/01 at 3:10 pm #100312How do you configure the routing?
2020/09/02 at 3:55 am #94554That would be great. Right now we’re able to work within the 32 input channels on the SQ.
I’m a little fuzzy on the idea here though. If I get the second S-link card, one S-link goes to the Qu Pac, and the other goes to the stage box (AR2412). From there, all of the inputs will become available via patching the channel outputs to the inputs of the Qu? I’m sorry for confusion, I’m just trying to understand so I can relay this information to my leadership.
2020/09/01 at 7:17 pm #94550The SQ7 has 12 available. The issue is it would be beneficial to have mixes available for subs, front fills, and live stream. Currently just using a matrix with the house mix for all of these.
2020/09/01 at 6:57 pm #94549Ok thanks for the help! I think we would be looking at minimum a dozen IEMs.
2020/07/05 at 3:27 pm #93140@SteffenR
So are you saying that the SQ Drive can be used simultaneously with the USB-B interface?
2020/06/24 at 1:36 pm #92825That was it! It wasn’t routed correctly to USB. Thanks! Should all of the channels be routed to USB in this tab?
2020/06/23 at 9:13 pm #92807The setup is currently very simple. I was recording a graduation ceremony for a small school that uses our facility. I was only using one mic at the time. It was coming in to channel 25. Every other channel is recording except for this channel. The audio files in the folder reflect this. It skips from track 24 to track 26. When looking at the multi-track screen, every track appears normal except this channel. It is grayed out and shows no input level.
Without the audio, I was unable to provide the video product which in turn cost me. This was not associated with my church. Thanks for asking!
2020/06/18 at 3:22 pm #92695Excellent! Thank you! I didn’t know this video was out there!
2020/06/17 at 7:13 pm #92669@markpaman I have a few questions if you’re willing to answer:
1) Can you give me an idea of what the routing should look like?
2) How do I set the master clock?
3) Does the gain control/phantom power have to be controlled by the QuPac for all of the channels (including SQ) or just for the channels in use on the QuPac?2020/06/15 at 1:39 pm #92600From what I’ve gathered, it’s the SQ series.
It actually happened again this weekend, except that I read another post explaining that the screen is actually still functional, it’s solely the display that is frozen. I was able to stop the recording and save the audio files just by going to the utility page and pressing on the screen where I remembered the correct pages and controls where. I also references pictures from the manual to make sure I was pressing the correct area of the screen. It worked this time but I really hope A&H has a fix for this soon. Such a great console to have such a silly thing like this causing trouble.
2020/06/11 at 11:57 am #92512@nicola thank you for your response! Very professional compared to some others that I’m getting.
2020/06/10 at 8:02 pm #92490Hello! Does anyone know if it is possible to assign a separate Aux mix per ME-500 mix unit? For example, Aux 1 to the first Me-500, Aux 2 to the second, and so on. FYI, currently daisy chaining from one unit to the next.
2020/06/10 at 7:48 pm #92486Ah, I found it! Thanks!
2020/06/10 at 7:37 pm #92485I did not see the option for it in the I/O screen. Maybe you could enlighten me
-
AuthorPosts