[MoStyles]

I’m running the CQ20B in an 8u with crown amp above for monitors without any problems at all. (Both from and back are open)

[MoStyles]

Thanks for the reply. I’ll test this on deferent controller like my Windows laptop. Sounds like the iPad app might just need an update.

[MoStyles]

The demo doesn’t show the 19/20th input for the CQ20b. ST 2 is another fader right next to ST 1 on the app if you’re connected to a CQ20b. There are a few minor features that are missing in the demo. Hope you enjoy your new mixer like I do!

[MoStyles]

Jeager28, I just logged into my CQ20b and verified you have 8 mono outs or you can link 3 stereo from the 6 outputs. (mains are already linked) I also checked the “Alt Out” (only on CQ18B) and headphones are just copies of of these 8 outs / 4 stereo pairs. You can however control these outputs pre or post master faders, EQ, FBA, Compressor, Limitor all independently of the main mix. These mixers should work well as IEM system as long as 8 mono outs or 4 stereo pairs is not a limiting factor. Hope this helps!

[MoStyles]

Keith,
This was very helpfull and I have been able to change the USB recording to 5/6 output. That sovles the issue of recording any channel I want seperate from the main out. Thank You!

2nd Question: In regards to tracking mutlicHannel on the SD card, Is there an easy way to playback to the main monitors L/R without flipping each input source to SD/CD/USB then adjust all the fader levels acourding? (I don’t have all instruments going to the mains/monitors) Could I also assign this to an output mix for playback like the USB? A band often the wants a quick playback to know if they need another take. Current way takes me about 5 minutes just to get the inputs and faders levels changed.
Thanks for all the help!

[MoStyles]

Can you link a keyboard LR input and still have the left and right inputs both be mono in the mixer. (E.g., Left input to send to bother Left and Right Main Output)

[MoStyles]

I can do this in presonus Studiolive 16R,24R,32R models and it very useful for a quick edit.

[MoStyles]

I second this. I use three just for mutes on main output and two monitor sub mixes.

[MoStyles]

This is my #1 requested item. HPF should always be on the EQ page too.

[MoStyles]

+1

[MoStyles]

+1 (3 mute groups would be plenty)

[Author]

Posts