Multi Select Input source not working with Linked inputs

Forums › Forums › CQ Forums › CQ troubleshooting › Multi Select Input source not working with Linked inputs

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of MoStyles MoStyles 6 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2023/12/16 at 3:50 pm #117531
    Profile photo of MoStyles
    MoStyles
    Participant

    There is a bug when you use multi select with stereo linked inputs and try to change the input source from “Analogue” to “SDHC/USB” (config/Input tab) for audio playback from SD/USB/Daw. You have to select the linked chanels independently from mono. When are the devs planning on the next firmware update? Thanks!

    2023/12/21 at 2:21 am #117680
    Profile photo of bullmoon
    bullmoon
    Participant

    The bug is when using the iPad App, not the On-Screen built-in display. The other thing about this is that the current Input Source is not indicated with multi-select, nor is the source change indicated. So, you don’t really know until you leave muti-select what you may have done to the input source.

    2023/12/21 at 12:43 pm #117694
    Profile photo of MoStyles
    MoStyles
    Participant

    Thanks for the reply. I’ll test this on deferent controller like my Windows laptop. Sounds like the iPad app might just need an update.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.