[mark@foothillsbaptist.orgParticipant]

I got it to work!

I got a new Sandisk 16G. Plugged it in to a ME-1 and it was not recognized. Grr….

I plugged it into may computer (a Mac) the drive had some software preinstalled. Opend Disk Utilities and erased the drive. I also renamed from “NO NAME” to “NONAM”.

This time, when I plugged it into the ME-1, it was recognized! I saved the configuration, installed the upgrade, and it worked.

Now I am ready for the ME-U when it comes.

Mark.

[mark@foothillsbaptist.orgParticipant]

Yes, we have an existing Aviom system that the MMO will connect to. I will be replacing the AN-16/i at the FOH with the MMO on stage that connects to the AN-16D Pro distributer.

I could keep the AN-16/i and use 16 outputs on the iDR-64, but that seems like the wrong way to do it.

I do have a plan, and I think it will work, but I am not too sure about the Dante card in the port A of iDR-0 and the ACE in the port B and still have the MMO in the xDR-16.

I am about to pull the trigger on all this and I wanted a sanity check.

Mark.

[Author]

Posts