[kngaParticipant]

Really nice!

Wondering about price..

[kngaParticipant]

Hello!

Is there any temperature limit, to where use Qu? For example I will be using it outside this winter with temperatures below 0°C. I’ve use it in cold weather already, without any problem, but I’m just wondering in what conditions it is advisable to use it:)

Thanks!

[kngaParticipant]

So, if I buy this little box, than I can connect QU’s ethernet with ethernet IN on that box, and then connect box with MIDI controller and than mute my FX with pedal – is that possible? In that case, can I also connect ethernet OUT on box with my router so I still can have access to Qu-PAD?

Thanks for help,
Alen

[kngaParticipant]

To easily set all faders to POST fade on mix 9-10, select that mix, than go to Routing, and press All post. It is quicker and you also see what you are doing. With pressing ‘pre-fade’ I often confuse when it’s pre or post (if Sel button is lit or not). So I prefer going to routing and setting it there – I didn’t know that for quite a long time, so just my recommendation for you:)

[kngaParticipant]

For example, I work a lot with Proel DB2A 2ch active DIbox.

[kngaParticipant]

Thanks! So it’s not true (as I heard) that it may cause damage to 2ch DI – but it’s not logical to me. Cables were mine, I never have problems when working with them and I use a lot of condensers sometimes. I really assume it was this really cheap multicore, or something, I don’t know. Thanks for help! 🙂

[kngaParticipant]

Something similar happened to me, but I think it was more of a ‘hardware’ problem, meaning fader on CH2 got stucked at +5db. Of course I didn’t notice it at first, so when I was changing my layers/FX/Mixes/GEQ settings from this CH2 fader got to +5db, causing nice feedback (because frequency band on GEQ was pushed really high :)). I just shut it down, pulled fader down a bit roughly, and it was working okay since then. So mine problem was a bit different than yours, but just to let you know about it:)

Greetings!

[kngaParticipant]

It would be nice having RTA on channels or master, but unfortunately Qu series don’t offer that, but offer some other great things in comparisson with X32.

When I tweak my system I do it like that: I open RTA window on screen to see which frequencies are causing feedback when pushing system really loudly, and I also use my GEQ on faders at the same time, so I can tweak system and see RTA at same time.

[kngaParticipant]

What if 2 fx bus/return are already used? And you want specific FX for snare?

I agree, it’s too wet, even if you choose the smallest possible ‘wet’ setting.

[kngaParticipant]

When will the Windows Daw control drivers be ready for download?

[kngaParticipant]

I miss that too. It would be nice to make Mono Sub buss, put LPF and route it to LR (put HPF on). It’s not a perfect solution, but would help in some situations.

[kngaParticipant]

Hello!

Let’s start discussion, it would be nice to hear what other users are using.

I mostly use Reverbs, my favourite is Hall massive. Of course I make adjustments: shorten it to 2s, Lowcut to 150Hz, Highcut to around 5kHz. For my kind of music it works great, it’s meant to full music a bit and places between phrases, I don’t want to have it too dry. There are a lot of parameters in ‘expert’ section, I used to play with them and see what it does to sound.

[kngaParticipant]

Hello!

– In my experience key filter on gate is very useful function, you can gate things a lot better. Filter on compressor would make a compressor de-esser, so another very good function.

– RTA/spectro on EQ screen, because now it can be very time consuming when using it.

– I’d also want Lowcut filter on all mixes.

Greetings!

[kngaParticipant]

I’m using my Ipad 1 just for mixing with Qu-pad, so until know I didn’t Ipad that would have iOS higher than version 5. Now 1.8 firmware needs iOS 7.1. That wasn’t announced. And I really want to use new features, but do I have to buy new Ipad to use it with Qu-pad?:S

[kngaParticipant]

Days ago I tried exactly that, but I didn’t have my FX1 on vocals on Mix 9-10 (which was side fill Mix). How do I change that?

[Author]

Posts