[DubParticipant]

I’ve already seen that. I was hoping to gain some firsthand in-depth experience feedback on this.All that shows is that it can be connected. What are the drawbacks of doing this? Will changes on the FOH board affect the livestream or vice versa?

[DubParticipant]

Tried the tie lines last night. Didn’t have much time before service to work with it. It actually caused the drummer not to hear the two channels I tried it with. They went out. I didn’t get a chance to troubleshoot why. Hopefully will get another chance tonight.

[DubParticipant]

Yes. That’s what I did for his toms to save on outputs. If I can get his kick and snare post preamp to him I think he would be happy. Ill try the tie lines tonight.

[DubParticipant]

We are using the direct outputs on the board and a DX168 to provide 16 inputs to the Aviom. I have a few things grouped to an aux (toms) and sent to Aviom input module. The drummer did not like his sound when we switched the direct outs to post compression but everyone else was okay with it. His drums lost the punch and bottom so I am trying to help him out. He would be happy with just his drum channels being post preamp. Can a tie line and direct out be patched to the same socket?

[DubParticipant]

Thanks for the ideas Alex! If I understand you correctly, I could use a tie line post preamp on the drummer’s channels that go to the Aviom but leave the direct outs post compression? I’ve see the tie lines but have never used them. I’m not quite sure how to do the tie line. Would I tie to the same output?

[DubParticipant]

I will work on this some more tonight. Thanks for everyone’s input. I wish there were 1/4″ TRS matrix output jacks on the SQ but oh well.

[DubParticipant]

The matrix output is listed as a LR mono summing jack so it is not true stereo on the GL3800. Therefore, to use the same cable running to the stage that is currently plugged into the analog mixer, I cannot use the LR outputs on the SQ7. I haven’t found a dual XLR female to 1/4″ TRS female adaptor. The block diagram on the GL3800 says the matrix output is mono summing.

[Author]

Posts