[dymondaudioParticipant]

Interested in the dante card if it is still available?

idr-32 & T80 + iPad2/Editor
http://www.dymondaudio.co.uk

[dymondaudioParticipant]

still looking

idr-32 & T80 + iPad2/Editor
http://www.dymondaudio.co.uk

[dymondaudioParticipant]

PM sent

idr-32 & T80 + iPad2/Editor
http://www.dymondaudio.co.uk

[dymondaudioParticipant]

I have a couple of things coming up in Newquay but it’s more than a couple of hours from gloucester I’m afraid.

[dymondaudioParticipant]

excellent, thanks for your help.

[dymondaudioParticipant]

would i of needed to initially loaded a show with the surface connected?

idr-32 & T80 + iPad2/Editor
http://www.dymondaudio.co.uk

[dymondaudioParticipant]

quote:

---

Originally posted by scratchedguitar

quote:

---

Originally posted by dymondaudio

quote:

---

Originally posted by scratchedguitar

Getting a very strange issue, whereby editor will get either

‘See’ the rack but come up with a connection error on attempting a connection

‘See’ the rack, come up with the user page, login and get to 13% before dropping the connection…

This is over ethernet, directly into the rack… Any suggestions?

FoH Sound Engineer Plymouth Students Union

---

Assuming you are just using a computer (rather than a surface) it sounds most likely to be an ip address conflict between your computer and rack. We’re based in Cornwall if we can help any further.

Cheers
Matt

idr-32 & T80 + iPad2/Editor

---

don’t think it is

I’m running two systems both getting the same issue

System 1

Acer laptop
static ip 192.168.1.30
subnet mask 255.255.255.0
gateway 192.168.1.254

System 2

Macbook running Mountain Lion
Windows 7 in parallels (Bridged ethernet mode)

Mac
192.168.1.31
subnet mask 255.255.255.0
gateway 192.168.1.254

Win7
192.168.1.32
subnet mask 255.255.255.0
gateway 192.168.1.254

Exactly the same issue occuring…

(Macbook and Acer were not connected at the same time)

This seems to occur both in Mixrack only and surface and mixrack mode.

The ‘unsupported’ Mountain Lion version connects every third/forth time in Surface with Mixrack mode.

Any thoughts?

FoH Sound Engineer Plymouth Students Union

---

I have the same issue with mountain lion – it simply won’t connect in any way shape or form. Hopefully V1.9 which is due out any moment will resolve this.

I also have the same issue running W7 on parallels, I get all the connection options but none of them ‘see’ the mix rack, again this is related to mountain lion rather than windows.

If I use my old Sony VAIO on W7 I have no problems at all.

So the mountain lion issue is definitely software (mountain lion) rather than config related.

As for the acer laptop, silly question but is the firmware the same on both surface and rack?

Have you tried resetting the network settings on the rack?

idr-32 & T80 + iPad2/Editor
http://www.dymondaudio.co.uk

[dymondaudioParticipant]

quote:

---

Originally posted by scratchedguitar

Getting a very strange issue, whereby editor will get either

‘See’ the rack but come up with a connection error on attempting a connection

‘See’ the rack, come up with the user page, login and get to 13% before dropping the connection…

This is over ethernet, directly into the rack… Any suggestions?

FoH Sound Engineer Plymouth Students Union

---

Assuming you are just using a computer (rather than a surface) it sounds most likely to be an ip address conflict between your computer and rack. We’re based in Cornwall if we can help any further.

Cheers
Matt

idr-32 & T80 + iPad2/Editor

[dymondaudioParticipant]

TBH it didn’t even cross my mind that editor wouldn’t work with mountain lion from the off – we live & learn! As mentioned, thankfully parallels allows me to continue as normal. + about 4 windows based laptops! I just like my mac

[dymondaudioParticipant]

Thanks for your ‘help’

I simply asked if anyone had any ideas? not A&H sort it out etc. etc. So calm down!

Thankfully as I run parallels I can simply use editor in windows.

[dymondaudioParticipant]

I guess they need to keep some exclusivity options for the iLive otherwise it’s a t80/iDR system at roughly half the price so iLive sales would plummet.
Shame all the prices have gone up thanks to their new distribution deal with AT.

[dymondaudioParticipant]

If your referring to the app loosing connection, levels bouncing eraticly, loss of control etc etc. Then it’s an issue with the app which A&H are aware of.

[dymondaudioParticipant]

Thanks for the replies people, I’m pretty certain it was an ip conflict as its been fine since I set up the static ip.

Ive created network profiles for iLive cat5 and iLive wifi plus general Internet so hopefully I should not have a problem again.

Just as an aside, I absolutely love the iLive even without a surface it’s still a joy to use.
Abit like the mobile phone, how did I cope before!?!

[dymondaudioParticipant]

Thanks for the replys, the cat5 is connected directly to the iDR and have the wifi router switched off.

I think it may have been a ip address conflict.

Would that explain it?

I set a static ip on my mac (well I think I have anyway) and last nights show went without a hitch.
I still had system busy a couple of times but for less than 5 secs at a time.

Matt

[dymondaudioParticipant]

Yeah, definitely got multicast enabled. Still wouldn’t explain the issues when only using cat5 and the wifi is off. Also, for this show because I have to sit in a ‘booth’ I havent been using the iPad only editor. Thanks for the suggestion though!

[Author]

Posts