Forum Replies Created
-
AuthorPosts
-
2024/04/17 at 5:21 am #121395
Do you have IP controllers connected to it? I have seen it in the past where those can cause what you described. Rebooting the ip controllers solved it for me.
2022/06/21 at 4:09 pm #107689Nice!
I see that the iPad app can now support effects, is there any way to see the effect insert 1 and 2 for the inputs?2022/03/23 at 6:14 pm #106526Glad it solved your problem. for me it worked simply rebooting the IP1…not the console.
2022/03/19 at 4:02 am #106488Do you have any IP controllers connected to it? I have seen the same issue and when i rebooted an IP1 controller and it was solved. you can test by disconnecting the controllers one at a time.
2021/10/16 at 1:54 am #104029True, if you set the attack time to 20 seconds, the compressor wouldn’t work. But if you set the attack time to 1 second and the release to 20 seconds, it would essentially be the same thing as a auto gain control.
I do not feel that we need to have someone with fingers on the faders for such a simple thing as raising or lowering volume a bit between the ~45 minute speakers.
I should look into AMM, but I didnt think it was meant for one microphone.2021/10/10 at 9:06 pm #103947Not helpful at all. Any help is appreciated.
There are AGC modules available for processors for a reason.
If a sound goes over a certain threshold, the sound would be compressed until it does not go over the specified threshold for 10 seconds.
2021/09/28 at 2:05 pm #103705Theres a separate “feature request” forum thread under Avantis.
+1 for gain addition to gang, I would also like to see an option for ganging for all mixes as well as LCR.
2021/05/16 at 2:18 am #101334Ok. Thank you. I feel confident that im good to go.
🙂
2021/05/15 at 3:14 am #101324Hi, Thank you for the response, and sorry for not being more clear.
What I am trying to do is using the equipment I already have and use to edit audio, for hifi audio listening.
I am playing the sound from a computer into the SQ5 via usb and have my Sennheiser HD800s plugged into the monitor jack, and am wondering if I am getting any loss of quality this way. Second question was if I need a headphone amp with the Sennheisers and SQ5.2021/05/07 at 1:21 pm #101164Wait… you can only have one concurrent Avantis director connection to the Avantis?
2021/04/07 at 12:48 pm #100473Mine did the same thing. For me, the USB drive wasn’t prepared correctly. I believe i forgot to extract the zip file.
I just restarted the console and it gave me an option to update firmware or cancel. I just prepared the firmware correctly and clicked update. Update happens quickly.
2021/03/25 at 6:23 pm #100143I noticed high CPU usage from Avantis Director on my Macs too. it also takes 20-100 seconds to connect to the Avantis on wifi connections where it only takes 2 seconds for the iPad app.
overall I am getting good use out of the Avantis Director. I am new to &2021/01/16 at 1:25 am #98125I agree that the best way is to have fingers on the console, but for some of our smaller events we don’t have anyone at the console.
do you think i would gain anything with the D-Pack compressor over the free compressor for speech?
2021/01/15 at 4:43 am #98090thank you, that worked.
2021/01/14 at 4:04 am #98080How? I cant find how to do it.
-
AuthorPosts