USB input Strange behavior

Forums Forums dLive Forums dLive troubleshooting USB input Strange behavior

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #59398
    Profile photo of jfjf
    Participant

    After loading a basic configuration, we have found that the USB drive is configured as mono on the IP128. The problem is that if we mute the ip128, we always sound on the master !!! .
    Conclusion, the unconfigured channel of the USB drive goes directly on the master bus.

    The problem was solved by patching the IP in stereo mode.

    Strange behavior ! ?

    Best regards ,

    jf

    #59425

    Hi @sno77340,

    By default the USB inputs are configured as a stereo input on to a stereo channel.

    Can you confirm which template show and scene you recalled and what firmware version you are running on your system?

    Best Regards,
    Ben

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.