QU-16 with other digital stagebox?

Forums Forums Qu Forums Qu general discussions QU-16 with other digital stagebox?

This topic contains 5 replies, has 5 voices, and was last updated by Profile photo of xyz xyz 4 years, 2 months ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #54718
    Profile photo of knga
    knga
    Participant

    Hello!

    Is it possible to connect QU-16 with for example X32 stagebox or X32 Rack? I know it’s possible to connect it via cable, but would it recognize each other?

    Thanks,
    ALen

    #54719
    Profile photo of GCumbee
    GCumbee
    Participant

    Bet you can guess the short answer.

    #54722
    Profile photo of [XAP]Bob
    [XAP]Bob
    Participant

    No – completely different protocols…

    #54728
    Profile photo of xyz
    xyz
    Participant

    The old digital spilt rears its head again huh?
    I have seen an X32 spliter with 4x ADAT out ports to connect digitally scenario, however I don’t know of any way to get that into the QU.

    #54729
    Profile photo of cornelius78
    cornelius78
    Participant

    You might be able to do it via a DAW.

    Qu as clock master (has to be,) USB cable between Qu and DAW, different USB cable between DAW and X32 rack, cat5 between rack and stagebox. It’s dependent on the DAW being able to manage two different audio devices simultaneously, and I imagine the latency would be a problem, and you’d be limited by the USB cable length.

    #54730
    Profile photo of xyz
    xyz
    Participant

    Yes, I suspect the latency would be the issue with this.
    And also DAW being able to manage two different audio devices simultaneously…
    Anyhow… i’ll just stick to anologe splitting

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.