Phantom power engagement for a QU-24

[frank1]

Our church recently acquired a new A-H QU-24 mixer, but we are at a complete loss of how to engage phantom power even after having carefully combed through the user manual and online forums such as this one. If anyone out there could help that would be great.

[Bear]

Select the channel , go to the processing screen press and hold the 48v button on the screen for a few seconds . Hope that helps

Attachments:

You must be logged in to view attached files.

[frank1]

Thank you for your suggestion, which we have come across several times before. Our initial hurdle is how the heck does one get the “48V” option to appear on the processing screen. I, and others, have probably pressed every combination of buttons imaginable, but we have never been able to get that (48V) option to appear on the screen.

[Bear]

Maybe someone locked it out , administrator perhaps?

[SteffenR]

The option is only valid if you use preamps.
With USB sources it’s not available.

[Bear]

Here’s a short video I just posted , I’m not very good at but hope it helps .

[Bear]

Also before you unmute the channel adjust bring down your fader and adjust your gain to suit your needs . Hope this helps .

[Bear]

Here’s the correct link the other hornet off.

[Bear]

Sorry for the typo the other video link got cut off

[Author]

Posts