cq18t -20db pad

Forums › Forums › CQ Forums › CQ General Discussions › cq18t -20db pad

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of Jmcginness Jmcginness 1 week, 6 days ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2024/04/17 at 11:55 pm #121424
    Profile photo of Jmcginness
    Jmcginness
    Participant

    I need help with how to activate the -20db Pad on the cq18t mixer. The specifications say that the line inputs (combi sockets) have -20dB Pad (Fixed).

    Is this already active? How do I activate?

    2024/04/18 at 12:02 am #121425
    Profile photo of Mike C
    Mike C
    Participant

    The 1/4 inch input on the combo jacks is pre set with a 20db pad.

    2024/04/18 at 12:19 am #121426
    Profile photo of Jmcginness
    Jmcginness
    Participant

    Thanks. So if I use the 1/4 inch input I get the -20db. If I use an xlr cable into the combo jack I do not get the -20db?

    I am wondering as I am looking to run the main output of another mixer into the cq18t and don’t want to overload the inputs. The other mixers main out is XLR.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.