AR84 Sync Light Flashing But No Ready Light

Forums › Forums › Other A&H products › AR84 Sync Light Flashing But No Ready Light

Tagged: 

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Mike C Mike C 1 month ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2024/04/02 at 6:56 pm #121015
    Profile photo of Dan
    Dan
    Participant

    So I’m using a Qu-PAC with an AR84 and they’ve been working perfectly for about 6 months without a problem with gigs 2/3/4 times a week.
    However setup in a venue the other day and the AR84 just doesn’t want to play ball?! It powers up fine and the sync light is flashing orange/yellow as normal but the ready light doesn’t light up!
    Also not getting any audio pass through either way and on the Qu-PAC it shows the expander as not connected.
    I’ve tried power cycling and different ethercon cables etc.
    Any help would be great fully appreciated.

    2024/04/02 at 7:34 pm #121016
    Profile photo of Mike C
    Mike C
    Participant

    Check the S Link connections that the pin wires are not bent or out the track
    that keeps them in line.

    Maybe try a firmware reload.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.