Forum Replies Created
Viewing 14 posts - 1 through 14 (of 14 total)
Viewing 14 posts - 1 through 14 (of 14 total)
Yes, I completely agree!
But this is only the beginning.
When will the update?
Or never!
@markpaman Yes thank you.
Thank you.
And what’s with itunes?
Thank you. I’ll try.
You understood correctly. So it is impossible to do?
I used to have a Mackie DL1608 console and there were no such problems.
Here’s my scene.
It seems to me that this will be more visible.
https://cloud.mail.ru/public/X4vt/noyqvUzec
Leave as is, just turn off channel 5 “Tanya” and turn on channel 6 “Monit” (pre in mix 5-6) and say. Listen to the main RL, why do the effects sound there ???
Look at the photos.
https://cloud.mail.ru/public/6DXn/bj1dkTvnR
Thank you.
Mark! I need the effect on channel 6 in the monitor line and the effect on channel 5, which would have been heard in the main RL. They should not depend on each other.
Bob! I need all four fx effects for different musical instruments (drums,back vocal etc).
Giga, I attached the photos above.
Try on the first photo (IMG_0263.PNG) channel Tanya “off” or put the fader on “0”
The rest is done in other photos. It should turn out like mine. Thanks for the help.
Thanks for the answer.
Dick, I have a mixing console QU-SB and there are no layers.
I’m mixing with the ipad.
Giga, it will be in the afternoon.
Giga, you’re right!
When I turn off Tanya’s channel(5), somehow the effects go to the main (LR).
Thank you.
I have one vocal channel (5) going to the total mix of LR, and the second (6) (It is parallel to channel 5) goes only to the monitor lines. This channel for monitor lines has another equalization, but the effects are the same as in channel 5.
Sorry, it’s hard for me to explain. Attached photos. Thank you.
https://cloud.mail.ru/public/6DXn/bj1dkTvnR
Thanks for answers. I will write in detail.
I connect a vocal microphone with an 3 Pin XLR Female To Dual Male Audio Adapter Cable (Y cables) to channel 5 for the RL and to channel 6 (pre fader) for the monitor line (mix 5-6). I send the hall effect to channels 5 and 6. Everything is working.
But, when I turn off channel 5, it is audible with fx processing (hall) in the monitor line (mix 5-6).
How to get rid of this? Thank you.